TurboPrint & PrintFab

I use after market ink cartridges and understand the iP2000 ink counters will not be reset. I expected TurboPrint would reset its counters when I select TurboPrint Control > Edit > Reset Ink Counters Now. This does not work. The TurboPrint Monitor indicates both Colour and Black ink levels low and r...

Zedonet,

I am embarrassed to report the black printing problem has been resolved by replacing the black cartridge tank - even though I was able to print with the other driver (at reduced size) there must have been insufficient ink to work with turboprint. Anyway, the test page works fine now!

The nozzle check test page starts with a black grid (sloping horizontals) labled K at left side.

The printer is listed as usb://Canon/iP2000. I did log in to xtpconfig using sudo xtpconfig. Th error message remains the same: Printer not found.

Thank you, Zedonet, for the reply. I will try the config advice. For the black printing, the issue is a mixed document, with black text and coloured picture, for example, prints only the coloured portion. For example, on the test page I see no text printed except the coloured web link to www.turbopr...

The help/manual problem was that I failed to select the Firefox browser to view the file. I have carefully re-installed and re-setup turboprint, but the other problems remain. There is some discussion about getting 'ink quantity check' to work in the setup portion of the manual, so I will probably b...

I installed TurboPrint 1.95-2 on a Pentium III PC running Ubuntu Edgy Eft. All seems well with the installation. The printer is recognized. I can print with it, but only in colour. Problem symptoms: 1. No black or gray scale printing. 2. No Help files or manual installed 3. TurboPrint Printer Config...