TurboPrint & PrintFab

Hi Zedonet, thanks for your reply. I had already scrolled the forum for similar issues, and had already followed your steps, however, what I am missing, is my papers (Media Type) when I go on to print from Gimp. Of course I could add them manually again as I did the first time, but may I say that th...

Hello All, I replaced my system disk because / was too small, and I copied over the /usr/share/turboprint/profiles that were on the old one, however, I don't see them in the Profiles section of the Turboprint Control Center, and of course I cannot select the paper profiles I had custom made from Zed...

Yes, the sliders got rid of the cast, even if I forgot to set Gray Photo.

So what is the use of Gray Photo?

Is there a way to save the settings?
Switching back and forth from color to BW would be easier.

no, I mean that I forget the settings...

so setting "Gray photo" doesn't exclude colored cartridges?

Hello All, I know it has been debated before, but I was unable to sort out the problem. I did not experience this color cast before, and it's not my first BW print, but now I have a slight magenta cast on the print. The printer is a Canon Pixma-Pro 10s, paper Canson Rag Photographique, Gloss Auto, Q...

Hello and thanks for your support, yes, it looks like I was too conservative in applying the corrections. Ok for the check-box missing. In another post on the forum I read that RGB/sRGB profiles are not needed, given that they are installed by default. So everything is clear, now... for the moment. ...

One more thing, in my "Profiles" Tab, at Color spaces I have only CMYK, no RGB/Generic,or RGB/sRGB.

This looks weird.. but I do not know where to find them on my Ubuntu 20.04.

On the PDF manual for TP, page 40, Individual Color Correction, says: "With the option "use individual color correction" you can ENABLE or DISABLE these controls". I should find a checkbox here, I guess, but there isn't one. I wonder if my setting just disables individual color c...

Hello All, I am on Turboprint/Ubuntu 20.04, and print from Gimp. I am having a hard time to obtain the correct pink/complexion I see on my calibrated display when printing on my Canon PixmaPro 10s, with Canson Baryta Photographique II. I tried tweaking the TurboPrint Control tabs Color/Saturation +4...

hello?!
is there anybody out there?

So, the printer address is set as bjnp://192.168.1.xxx:8611, however, in TurboPrint Control Center I see, Connection Type set to "standard printer" (shows an USB cable), instead of Other Printer (Network). If I choose Other, I have the following options: - LPD - JetDirect - IPP - CUPS None...

follow up..

I had a problem with the IP address (probably I reboot the printer and DHCP gave it a different address), which is now solved.

The printer works, is printing, BUT.. still shows "printer not connected" and the ink bars are all blank...

thanks!
Printer back in business... <g>

ok, I have clue...

in /var/log/turboprint/print.log I see...

device for Pro10S-TurboPrint: bjnp://192.168.x.yyy:8611

but the current address is 192.168.x.zzz so this is the problem.

Where is written the printer address, so I can fix the problem?

thanks,

-Gian

Hello, I have a Canon Pixma Pro 10s, with Turboprint. There is something weird, because the driver complains that the printer is not connected, and shows a USB cable. However, the printer works from the web manager, answers pings correctly. It's like if the driver is looking for the USB cable, ignor...