dry time is specific to the combination of ink and print media. We have no experience with printing transparent films with the T120 printer, so I cannot give a reliable answer.
bidirectional communication works only with network printers that have WiFi or a network port.
If you connect an USB printer via a router, the communication is unidirectional and no printer or ink status can be retrieved.
Hello, we've been in contact by email where my colleague suggested: I assume that you just installed the license keyfile without reinstallng the software or the print queue? In that case everything should be unchanged and I can see no reason why printing should stop working. Did you check your USB c...
printing borderless with automatic duplex generally does not work - one edge of the paper must remain in the printer to be reversed. The driver settings should not allow this combination, should be fixed in a future PrintFab release.
Hello, I just investigated Epson's documentation for the Pro 4880 printer and found that this behaviour is as intended by Epson: When "Print Separation Line" is enabled, a line is printed below AND at the right side of the printout. It is not possible to enable/disable them individually. A...
Hello, TurboPrint offers to select a trial mode, the selection window appears when you start the TurboPrint GUI for the first time using the icon "TurboPrint Control" or the command line "turboprint": TurboPrint trial version selection.png You probably did not complete TurboPrint...
Please make sure that TurboPrint Daemon is enabled in TurboPrint Config: Dialog "Settings" -> check "TurboPrint Monitor - start daemon when booting". To start TPDaemon manually, you can use the following commands from a terminal window: sudo service tpdaemon start or sudo tprintd...
Please open TurboPrint Control, dialog "Edit" and configure your printer as follows: Printer is: other printer Connection: Network printer LPD Server: <ip address of printer> Printer: <leave empty> then confirm with "Ok" and check in TurboPrint Monitor if you see printer and ink ...
Hello, this error is sometimes reported for network printers that do not report printer and ink status. How is your current printer setup: - printer model - connection by LAN or WiFi - is the printer attached to a router or printer server? And please open TurboPrint Control and find out the printer'...