TurboPrint & PrintFab

Hello,

for macOS Ventura you need to install the current PrintFab version 2.98-1. You have two years free updates, so this version is included in your PrintFab license.

Hello, we recommend to use the media setting "Archival Matte" for these fine art papers. You can also create new color profiles using our color profiling service which is described in the TurboPrint manual and on our website: https://www.zedonet.com/en_shop_tp_profile.phtml Please make sur...

Hello, you can add the size "11x17 Borderless" in the file /usr/share/turboprint/printers/Canon_imagePROGRAF_Pro300.tpp Add a new page size at the end of the [Size..] entries: [Size27] Name=11x17" Borderless Sizeid="na_ledger_11x17in" Size=11196,17274 Margins=0,0,0,0 Borderl...

Hello and thank you for the posive report! Do you think that the problem with "Grey" is caused by the printer or by the driver? Do you use the printer for screen printing with an "all black" ink set or for color printing? For color printing, you probably figured out that you can ...

Hello, I just answered by email: The problem might either be caused by wrong printer driver settings or by the printer itself - some HP printers switch to greyscale mode if the printer has run out of color ink. Please send me the TurboPrint log file /var/log/turboprint/print.log then I can check if ...

Hello, if solid black is printed with visible halftoning (visible dots), please make sure that you enable "Separations" in the application and that you set the "Contrast" setting in the print dialog (PrintFab Settings -> tab "Main") to the default of 100%). Regarding en...

Hello,

the SC-P6000/6070 printer is actually not supported by PrintFab. You could try the PrintFab driver "Epson Stylus Pro "7890" which is the predecessor. If you try this driver, please lete me know the results.

Hello sgroleau,

the cut is always done at the end of the selected page format, e.g. after 19" with 13x19. Selecting a page format with a lower height in the print dialog should help unrolling less paper.

Hello, currently the TurboPrint GIMP print plugin only works with a regular installation of GIMP (.tgz .deb .rpm or compile &install from source), not with a SNAP package. This is because SNAP isolates the application from the rest of the operating system, so GIMP doesn't find the TurboPrint plu...

Hello, thank you for the hint about "Reset print service". As I undestand this did not solve your other problem In Capture One, if I adjust the printer settings in the C1 print dialogue, they are changed by the time I go to the printer driver. Again, if I repeat the print, the settings may...

I'm going to send you an email with a link to the beta version with the experimental WT7900 driver.

Hello Matt, the Pro-1000 printer is supported and should work in PrintFab 1.13. Did you actually verify that PrintFab 1.21 solves the problem? There might either be a general problem with the printer setup (e.g. network settings if the printer is connected via network) or a specific combination of p...

Hello, there is no easy way to add support for white. However, we are working on a PrintFab version with support for DTF printing which also needs white ink. Support for white is currently available in a beta version of PrintFab for Windows, I could add an experimental driver for the WF7900 printer....

TurboPrint for Linux currently does not offer this option. Only the product "PrintFab", our printer driver for macOS and Windows has this option. However, we have plans to add this feature in a future version.

Hello, thank you for your feedback. Please make sure that the print head and the ink supply is working properly by printing a nozzle test page (PrintFab App -> Toolbox -> Nozzle Check) - the staircase pattern should be complete. The irregularities should become less visible or even disappear complet...