TurboPrint & PrintFab

Hello,

bidirectional communication works only with network printers that have WiFi or a network port.
If you connect an USB printer via a router, the communication is unidirectional and no printer or ink status can be retrieved.

Hello, we've been in contact by email where my colleague suggested: I assume that you just installed the license keyfile without reinstallng the software or the print queue? In that case everything should be unchanged and I can see no reason why printing should stop working. Did you check your USB c...

Hello,

printing borderless with automatic duplex generally does not work - one edge of the paper must remain in the printer to be reversed. The driver settings should not allow this combination, should be fixed in a future PrintFab release.

Hello, I just investigated Epson's documentation for the Pro 4880 printer and found that this behaviour is as intended by Epson: When "Print Separation Line" is enabled, a line is printed below AND at the right side of the printout. It is not possible to enable/disable them individually. A...

Hello,

the cut lines are a printer specific feature. Which printer do you use?

Hello, for license problems, please contact us directly by email or via the link "Contact us" below.

@zellmer: good to hear that it's working - thank you for the quick reply!

@funfactor: I will send you the new version of tprintdaemon by email

We will include the fix in the next TurboPrint release.

I'll send you an email with a new version of tprintdaemon for testing. It should solve the "symbol lookup error".

Hello, TurboPrint offers to select a trial mode, the selection window appears when you start the TurboPrint GUI for the first time using the icon "TurboPrint Control" or the command line "turboprint": TurboPrint trial version selection.png You probably did not complete TurboPrint...

Hello,

can you please try if it helps to uninstall the package "ippusbxd"?

Please make sure that TurboPrint Daemon is enabled in TurboPrint Config: Dialog "Settings" -> check "TurboPrint Monitor - start daemon when booting". To start TPDaemon manually, you can use the following commands from a terminal window: sudo service tpdaemon start or sudo tprintd...

Yes, this is correct.

Please open TurboPrint Control, dialog "Edit" and configure your printer as follows: Printer is: other printer Connection: Network printer LPD Server: <ip address of printer> Printer: <leave empty> then confirm with "Ok" and check in TurboPrint Monitor if you see printer and ink ...

Hello, this error is sometimes reported for network printers that do not report printer and ink status. How is your current printer setup: - printer model - connection by LAN or WiFi - is the printer attached to a router or printer server? And please open TurboPrint Control and find out the printer'...

Hello, thank you for the workflow description. Most of the description is specific to RAW development and I can comment only on the TurboPrint specific steps. I am now ready to print the photo using TurboPrint. After I click on File --> TurboPrint, I do the following steps: Change Media Type to the ...