Can not print to PIXMA IP 1600

Questions on Installation
Post Reply
ricardoj
Posts: 1
Joined: Mon Oct 16, 2006 5:07 pm

Can not print to PIXMA IP 1600

Post by ricardoj » Mon Oct 16, 2006 5:10 pm

I am trying to install a Pixma IP 1600 printer using Turbo Print version 1.94-4 on SuSE Linux 10.1, but as soons as I sent something to the printer, the messages at the botton appears on my turboprint_cups.log.

If I run the printer test from TurboPrint, it works without problems.

How can I proceed ?

Thank you for your attention. Regards,

Ricardo Jorge


#######################################################
New print job Sun Oct 15 01:44:38 BRST 2006 (pstoturboprint 1.94-2)
job-id 2
user root
title Test Page
copies 1
options
file
test directory access:
linux-gate.so.1 => (0xffffe000)
libm.so.6 => /lib/libm.so.6 (0xb7f04000)
libc.so.6 => /lib/libc.so.6 (0xb7de4000)
/lib/ld-linux.so.2 (0xb7f3d000)
/usr/bin/tpprint -v2 -l/var/log/turboprint_cups.log --ppdfile=/etc/cups/ppd/tp0.ppd --psfeatures /tmp/pstoturboprint4332.chunk /tmp/pstoturboprint4332.var
----------- Start of var file -----------
----------- End of var file -----------
GSCOMMANDLINE=gs -sDEVICE=pcx24b -rx -gx -dSAFER -dNOPAUSE -dBATCH
TPCOMMANDLINE=/usr/bin/tpprint -a0 -e1 -sx -v2 -l/var/log/turboprint_cups.log --ppdfile=/etc/cups/ppd/tp0.ppd --psheader=/tmp/pstoturboprint4332.chunk
COMPLETEPIPE=/usr/share/turboprint/lib/tpstdin --paste /tmp/pstoturboprint4332.chunk | gs -sDEVICE=pcx24b -rx -gx -dSAFER -dNOPAUSE -dBATCH -sOutputFile=/tmp/pstoturboprint4332.fifo - >> /var/log/turboprint_cups.log
----------- Start of print job -----------
-r must be followed by <res> or <xres>x<yres>
------------ End of print job ------------

zedonet
Site Admin
Posts: 1770
Joined: Fri Oct 06, 2006 8:02 am

Post by zedonet » Tue Oct 17, 2006 7:11 am

Hello,

Installation of TurboPrint is not complete (for an unknown reason). Please check if the directory "/var/log/turboprint" and subdirectories "lib", "printers", "colors" etc. exist and are readable for everyone. You can also repeat installation using the TurboPrint .tgz archive.

Post Reply