Epson Printhead high adjustments

Questions on certain printers and applications
Post Reply
Posts: 11
Joined: Wed Feb 15, 2017 6:44 am

Epson Printhead high adjustments

Post by sdumbliauskas » Sun May 14, 2017 6:33 am


I have problem with envelopes printing on my Epson SCP800.
On native epson drive are 2 settings for print head adjustment - "Platen Gap" and "Paper Thickness".
When platen gap set to maximum and paper thickness to minimum it prints envelopes without smearing them, but Epson driver applies to much ink and its impossible to print on such kind of envelopes.

With Prinfab same kind of envelopes prints perfectly, but print head smears on the envelope even when "Paper thickness" set to 1,5 mm.
Is there any possibility to adjust Epson Platen Gap with Printfab driver?

Best regards

Site Admin
Posts: 1880
Joined: Fri Oct 06, 2006 8:02 am

Re: Epson Printhead high adjustments

Post by zedonet » Wed May 17, 2017 10:38 am


currently there is no such setting, however I can add this in the next release. I will let you know when we have a preliminary version ready for testing.

Post Reply