Page 1 of 1

Sublimation printing

Posted: Tue Jan 09, 2018 3:46 pm
by Tipika
I'd like to use printfab for managing the color of my epson, for which i converted to sublimation printing

it's mandatory for sublimation that everything i print is mirrored, but i don't see such option, is not possible?

I'd like to make a custom color profile, but once the transfer has been applied, the result is mirrored, can you still make a color profile from the sample i printed, if the result is mirrored?

Re: Sublimation printing

Posted: Wed Jan 10, 2018 9:33 am
by zedonet
Hello,

it is no problem to measure the color profile chart if it is mirrored.

A "mirror printing" option will be added in the next release of PrintFab.

Re: Sublimation printing

Posted: Wed Jan 10, 2018 9:40 pm
by Tipika
so, if i understood right, in order to have it color profiled, i print the test chart on some polyester and then send to you (if the license plan allow it)

Re: Sublimation printing

Posted: Mon Jan 15, 2018 2:43 pm
by zedonet
Printing and testing the color profile can be done with any version of PrintFab, also with the 30 day trial.
A profile measurement costs EUR 14.95.

This is a short description of the profiling process:

- open the PrintFab Application, dialog "Profiles"
- add a new profile and select the type of paper (e.g. Glossy/Semiglossy photo paper), the print quality and ink limit (the default value 250 is good in most cases).
- print a profile color chart on a A4 or letter sized transfer paper. You will be asked for a profile order number - order codes can be purchased in our online shop for EUR 14.95.
- the final product (after sublimation) should be sent to our office
IMPORTANT: we have a new address:

ZEDOnet GmbH
- PrintFab Profiles -
Sedanstraße 8
87600 Kaufbeuren
Germany

A detailed explanation can be found in the PrintFab PDF manual, chapter 8.