printfab problem

fotokeramika
Posts: 7
Joined: Fri Aug 24, 2018 7:36 am

Re: printfab problem

Post by fotokeramika »

SCREEN LPI-90 LIMITED ONLY ON 90
fotokeramika
Posts: 7
Joined: Fri Aug 24, 2018 7:36 am

Re: printfab problem

Post by fotokeramika »

Ceramic Printing Process -ceramic waterslide printer-YOU TUBE-EPSON B310N
zedonet
Site Admin
Posts: 2156
Joined: Fri Oct 06, 2006 8:02 am

Re: printfab problem

Post by zedonet »

Thank you for the helpful video. Now I understand the print process better. However, I can't explain the problem yet.

Is the problem always the same - black printed okay, cyan printed too far left (about 5mm?).

You could send the PrintFab log files. It would be best if you send the files directly after printing the colors black and cyan.

To send the log files:
In the "Start" menu, open

Start -> All programs -> PrintFab -> Show log files

and enclose the file "printfab_preview.log". You can create a ZIP archive (e.g. compress from Windows Explorer using the right-mouse-button option "Send to ZIP archive") and send it by email.
Post Reply