epson et-2750 : photo quality not working (2880 & 5760dpi)

Questions on certain printers and applications
Post Reply
j.a.l
Posts: 1
Joined: Sun Dec 23, 2018 11:21 pm

epson et-2750 : photo quality not working (2880 & 5760dpi)

Post by j.a.l » Sun Dec 23, 2018 11:37 pm

hi,
I'm using turboprint studio 2.46-1 (jul 2018) - updated few days ago - with an epson et-2750.

On the main panel there's 7 prints quality, from 180 to 5760dpi (which the printer can do). First when configuring there's only 5 from draft to super. Mode "photo" (2880dpi) and "photoplus" (5760dpi) aren't available, worst, when selecting them (on the main panel) this automatically switch back to 360dpi quality. Currently the maximum quality is cap to 1440dpi.

I taken a look at Epson_EcoTank_ET2700.tpp (not editing anything) guess there's something wrong and easy to fix on it.

thanks for any help.

zedonet
Site Admin
Posts: 1775
Joined: Fri Oct 06, 2006 8:02 am

Re: epson et-2750 : photo quality not working (2880 & 5760dpi)

Post by zedonet » Fri Jan 04, 2019 3:41 pm

Hello,

the availability of print resolutions depends on the media type.

For the Epson ET-2750 printer the following print resolutions are available:

Plain paper: 180dpi, 360dpi, 360dpi fine, 720dpi, 1440dpi
Matte coated inkjet paper: 360dpi, 360dpi fine, 720dpi, 1440dpi, 2880dpi
Glossy / semiglossy inkjet paper: 360dpi fine, 720dpi, 1440dpi, 2880dpi, 5760dpi

The print dialog under Linux looks a bit different for each application program and in some applications the selection of the print quality is confusing.
From which application did you print?

Post Reply