Using Turboprint 2.09-2 installed from turboprint-2.09-2.x86_64.rpm on Suse 11.3 64 bit driving a Canon Pixma ip5200 printer connected to a USB port.
Since upgrading the OS turboprint has stopped working, initially the printer would not get out of the Stopped state. Then I had a look at it from the CUPS interface and there was an error message by my tp0 printer about note being not able to find
/usr/lib/cups/filter/commandtoturboprint
I found one in
/usr/lib64/cups/filter/commandtoturboprint
So soft linked on in the /usr/lib/cups/filter/ dir
Then I got a message about
/usr/lib/cups/filter/pstoturboprint
Again I soft linked the one from /usr/lib64/cups/filter
Now it prints but almost entirely black pages.
turboprint has stopped working properly
Hello,
TurboPrint version 2.16-1 has a workaround for the black page problem.
The "black page" problem is a known bug in Ghostscript - it should have been fixed in the release version of SuSE11.3:
https://bugzilla.novell.com/show_bug.cgi?id=603131
The problem with the wrong library path can be solved by moving
/usr/lib64/cups/filter/pstoturboprint
/usr/lib64/cups/filter/commandtoturboprint
/usr/lib64/cups/backend/tpu
to
/usr/lib/cups/...
or by creating a symbolic link as you did.
We will add a fix in the upcoming TurboPrint 2.16-2
TurboPrint version 2.16-1 has a workaround for the black page problem.
The "black page" problem is a known bug in Ghostscript - it should have been fixed in the release version of SuSE11.3:
https://bugzilla.novell.com/show_bug.cgi?id=603131
The problem with the wrong library path can be solved by moving
/usr/lib64/cups/filter/pstoturboprint
/usr/lib64/cups/filter/commandtoturboprint
/usr/lib64/cups/backend/tpu
to
/usr/lib/cups/...
or by creating a symbolic link as you did.
We will add a fix in the upcoming TurboPrint 2.16-2
-
- Posts: 5
- Joined: Wed Jul 21, 2010 6:11 am
-
- Posts: 5
- Joined: Wed Jul 21, 2010 6:11 am
Then I updated ghostscript from this location
http://download.opensuse.org/update/11. ... x86_64.rpm and that fixed it.
http://download.opensuse.org/update/11. ... x86_64.rpm and that fixed it.