I recently upgraded to TurboPrint 2.35-2 x86_64 on my openSUSE 13.2/KDE system.
I created a one page letter consisting of text with embedded pictures using LibreOffice 4.3.3.2.
I have LibreOffice set to use PostScript Level3 output.
Attempts to print directly to TurboPrint have an issue - the output wants to start a new page about half way thru each of the embedded pictures.
I tried exporting to a pdf, which looks fine on Okular, but prints in the same defective way.
The pdf prints OK to my Pro9000 when I print the pdf via the Windows stock Pro9000 driver using a Win8 VM.
I can print directly (BW) to my Brother laser (Brother driver, not TurboPrint) on Linux as well.
Thoughts?
Printing issue CanonPro9000
Re: Printing issue CanonPro9000
Hello,
I suspect that the problem is caused by a USB data transmission problem. Can you please send the following information:
- what is the printer "URI" in TurboPrint Control (list of printers, column "URI") - it should start with either usb:// or tpu:// ?
- please post the log file after a defective print (single page printed, several pages ejected). The file name is
/var/log/turboprint/print.log
The last section of the file starting from "#### new log file" is sufficient
I suspect that the problem is caused by a USB data transmission problem. Can you please send the following information:
- what is the printer "URI" in TurboPrint Control (list of printers, column "URI") - it should start with either usb:// or tpu:// ?
- please post the log file after a defective print (single page printed, several pages ejected). The file name is
/var/log/turboprint/print.log
The last section of the file starting from "#### new log file" is sufficient