Page 1 of 1
IP5000 CD printing
Posted: Sun Oct 22, 2006 8:42 am
by Bubba
Hi,
Anyone know how to make the inner hole of the CD image smaller for full printable CD printing?
I had a look at the ip5000 PPD file, but cant see where/how it does the inner hole mask.
Thanks.
Posted: Mon Oct 23, 2006 8:20 am
by zedonet
To change the printable area of the CD, please edit the printer description file, e.g.
/usr/share/turboprint/printers/Canon_PIXMA_iP5000.tpp
in the section
[Size14]
Name=CD Printable
ANumber=25
Size=5342,10066
Margins=270,466,3450,2010
Minmargins=134,134,118,275
CDMask=1500,4600
Param=0,0,600,0
the parameters behind "CDMask" specify the size of the center hole (1.5") and the CD (4.6").
Posted: Mon Oct 23, 2006 8:27 am
by Bubba
Thanks zedonet, problem solved.
Posted: Thu Jun 19, 2008 11:37 pm
by Lapino
I tried this and it works for the inner ring, but when I try to make the outer ring larger (for use with the Verbatim full printables) turboprint crashes with a segmentation fault. Is there anything else I have to change?
Posted: Tue Jun 24, 2008 7:26 am
by zedonet
To make the outer ring larger, modify the line
Margins=270,466,3450,2010
e.g. to
Margins=210,406,3390,1950
the maximum for the outer size is now 4726, the CD size is 12cm = 4.724".
Posted: Thu Feb 12, 2009 11:03 pm
by littletaff
zedonet wrote:To change the printable area of the CD, please edit the printer description file, e.g.
/usr/share/turboprint/printers/Canon_PIXMA_iP5000.tpp
in the section
[Size14]
Name=CD Printable
ANumber=25
Size=5342,10066
Margins=270,466,3450,2010
Minmargins=134,134,118,275
CDMask=1500,4600
Param=0,0,600,0
the parameters behind "CDMask" specify the size of the center hole (1.5") and the CD (4.6").
Tried that on my ip4500 and it didn't make any difference, it is only a minor thing as the rest of turboprint works brilliantly well!
I also made sure that I had a backup of the original!
Any suggestions as to how to get full face, with a 1inch center hole working, then I am listening!
Posted: Fri Feb 13, 2009 9:53 am
by zedonet
Hello,
if you are using TurboPrint 2, the CDMask parameters are ignored. Instead you can edit the size in TurboPrint Control Center, button "Sizes".
Posted: Fri Feb 13, 2009 10:19 am
by littletaff
Many thanks for your quick response, the solution is so obvious when it is pointed out! Works a dream now and yes I am using turboprint 2.xx
Apart from it being slightly off-center, apart from that, as I have said, it is working brilliantly well!
Posted: Fri Feb 13, 2009 4:07 pm
by zedonet
...also the x/y offset can be adjusted in the "Sizes" dialog window.