1320
Re: 1320
Hi,
I have exactly the same issue. I have just installed turboprint on the system and it never worked.
I have Canon Pixma Pro 9000 Mark II on a Suse 13.1 system
the error in the /var/log/cups/error_log is very cryptic
the /var/log/turboprint/print.log does not show any errors
I have exactly the same issue. I have just installed turboprint on the system and it never worked.
I have Canon Pixma Pro 9000 Mark II on a Suse 13.1 system
the error in the /var/log/cups/error_log is very cryptic
Code: Select all
W [02/Sep/2014:14:18:18 -0400] [Job 592] Printer error!
Re: 1320
Hello,
I am not sure were the error code is displayed - if it is shown in TurboPrint Monitor, it is probably an error code reported by the printer
The printer error code 1320 means "Flat path print preparation incomplete" and should only occur if you load the paper from the front (TurboPrint feed selection "Manual Feed") and don't follow the Canon instructions, e.g. to open the extension at the back of the printer ("Press the Front Feed Support button to open the Front Feed Support"):
http://kbsupport.cusa.canon.com/system/ ... E_ID=26113
I am not sure were the error code is displayed - if it is shown in TurboPrint Monitor, it is probably an error code reported by the printer
The printer error code 1320 means "Flat path print preparation incomplete" and should only occur if you load the paper from the front (TurboPrint feed selection "Manual Feed") and don't follow the Canon instructions, e.g. to open the extension at the back of the printer ("Press the Front Feed Support button to open the Front Feed Support"):
http://kbsupport.cusa.canon.com/system/ ... E_ID=26113