Epson Printhead high adjustments
Posted: Sun May 14, 2017 6:33 am
Hi,
I have problem with envelopes printing on my Epson SCP800.
On native epson drive are 2 settings for print head adjustment - "Platen Gap" and "Paper Thickness".
When platen gap set to maximum and paper thickness to minimum it prints envelopes without smearing them, but Epson driver applies to much ink and its impossible to print on such kind of envelopes.
With Prinfab same kind of envelopes prints perfectly, but print head smears on the envelope even when "Paper thickness" set to 1,5 mm.
Is there any possibility to adjust Epson Platen Gap with Printfab driver?
Best regards
Saulius
I have problem with envelopes printing on my Epson SCP800.
On native epson drive are 2 settings for print head adjustment - "Platen Gap" and "Paper Thickness".
When platen gap set to maximum and paper thickness to minimum it prints envelopes without smearing them, but Epson driver applies to much ink and its impossible to print on such kind of envelopes.
With Prinfab same kind of envelopes prints perfectly, but print head smears on the envelope even when "Paper thickness" set to 1,5 mm.
Is there any possibility to adjust Epson Platen Gap with Printfab driver?
Best regards
Saulius