Page 1 of 1
commandtoprint program on pixma mp830
Posted: Wed Oct 14, 2009 10:23 pm
by linuxpain
Hi.. I need some help. I'm getting this message:
Printer 'MP830' requires the 'commandtoturboprint' program but it is not currently installed. Please install it before using this printer.
I am new to my acer aspire one running linux lite and am completely lost. Suggestions, please.
Thanks
Karen
Posted: Thu Oct 15, 2009 7:06 am
by zedonet
Hello,
you could try the following:
1. open a terminal window
2. enter the command
Code: Select all
sudo cp /usr/share/turboprint/lib/commandtoturboprint /usr/lib/cups/filter
(followed by the "Enter" key).
See also this thread
http://www.turboprint.info/support/viewtopic.php?t=539
the user had also to enter the following command
Code: Select all
sudo cp /usr/share/turboprint/lib/pstoturboprint /usr/lib/cups/filter
to get TurboPrint on the Aspire One working.
Posted: Thu Oct 15, 2009 7:26 pm
by linuxpain
Thanks. I did search the topic before I posted and that didn't help yesterday. I did find another driver on openprinting.org that WAS briefly working. Now, it has decided to give this error: MP830 cups-missing-filter and when a print is queued up its status changes to stopped. This actually happened in the middle of a flurry of printing from pdf. I was printing fine with the openprinting driver, then suddenly error and no more printing. I've changed back and forth between the openprinting driver and turboprint and neither work, both return the same missing cups error. What's my next step?
Thanks,
Karen
Posted: Fri Oct 16, 2009 7:40 am
by zedonet
Can you post the output of the Terminal command
ls -l /usr/lib/cups/filter
so that I can see if the required files are present with proper access permissions (select the window contents with the mouse, then copy and paste to the forum editor field)?