Just installed TurboPrint. Trying to print to an Canon MX860 printer via BJNP. Looks like it can see ink levels etc. But, printing a test page results in a solid black page with some random junk on it.
OS is Fedora 12 amd/64bit.
Any ideas?
Thanks.
Canon MX860 only prints black pages with random jibberish.
Hello,
you also sent your problem report via our feedback form, where I answered it earlier today:
you also sent your problem report via our feedback form, where I answered it earlier today:
Can you please try the following:
1. print a "Nozzle Check" from TurboPrint Control Center, function "Toolbox"
2. print a "Testpage", also from "Toolbox"
3a) if that doesn't work, try the same using a direct USB connection (if possible)
3b) if the testpage works, try to print from your application. If it is "random" again, please tell me which application program you used to print.
It would be helpful if you could include a scan or digicam photo of the printed output.
I experience the same problem with Canon i350 running on Fedora 12 32bit (x86). Nozzle check works fine, but printing a test page results in producing solid black pages. The same happens when trying to print from other applications, e.g. gedit or OOo Writer.
The solution cited above did not solve the problem.
Some photos of how it looks like:
http://img62.imageshack.us/img62/4254/dsc01497f.jpg
http://img62.imageshack.us/img62/7818/dsc01496v.jpg
http://img193.imageshack.us/img193/6195/dsc01495q.jpg
The solution cited above did not solve the problem.
Some photos of how it looks like:
http://img62.imageshack.us/img62/4254/dsc01497f.jpg
http://img62.imageshack.us/img62/7818/dsc01496v.jpg
http://img193.imageshack.us/img193/6195/dsc01495q.jpg
Here's the full print.log with all printing processes so far. Note that I cancelled some of them in order not to waste ink.
http://www.sendspace.com/file/jd01w9
http://www.sendspace.com/file/jd01w9
I did a lot of testing and researching yesterday and found that it is a known problem in ghostscript - it is already fixed in the fedora12 packages
ghostscript-8.70-6.fc12
and
ghostscript-8.71-1.fc12
Bug 563313 - cups driver gives incorrect output with -r600x600
https://bugzilla.redhat.com/show_bug.cgi?id=563313
ghostscript-8.70-6.fc12
and
ghostscript-8.71-1.fc12
Bug 563313 - cups driver gives incorrect output with -r600x600
https://bugzilla.redhat.com/show_bug.cgi?id=563313