Epson SC P6000 / P6070

[Tommygunner99]

Hi I see this printer is not supported, can you let me know a suitable profile i could use ? A1 , 9 channel (no G and O) , i was looking at the P7900 profile but that has the G and O .
thanks

[zedonet]

Hello,

the SC-P6000/6070 printer is actually not supported by PrintFab. You could try the PrintFab driver "Epson Stylus Pro "7890" which is the predecessor. If you try this driver, please lete me know the results.

[Tommygunner99]

Thankyou for the info i will give it a try and let you know...

[Tommygunner99]

Yes the 7890 profile works , thankyou . i have a dead Grey Channel , and was successfully able to disable , and confirmed with the ink consumption . Though it didn't use Grey or Light Grey , but i assume they are tied together somehow... still used all the other colours.

[zedonet]

Hello and thank you for the posive report!

Do you think that the problem with "Grey" is caused by the printer or by the driver?

Do you use the printer for screen printing with an "all black" ink set or for color printing?
For color printing, you probably figured out that you can reduce or disable light inks with the slider "Bright Inks usage".

[Tommygunner99]

This Gray issue is a Blocked Head , so easiest way to fix is to disable the channel - rather than the head . I use for photo art printing (but i don't need a high degree of color accuracy) so this works well .
Thankyou for the tip on the Bright Inks Usage , i will use that for my sublimation .
Great Software for a Great Price !