ERROR - No connection to turboprint deamon
ERROR - No connection to turboprint deamon
Hi,
I'm using TurboPrint 2.53 on OpenSuse Tumbleweed. When I run TurbPrint Monitor I've get this communicate "ERROR - No connection to turboprint deamon". Still I can print using TurboPrint.
I'm using TurboPrint 2.53 on OpenSuse Tumbleweed. When I run TurbPrint Monitor I've get this communicate "ERROR - No connection to turboprint deamon". Still I can print using TurboPrint.
Re: ERROR - No connection to turboprint deamon
Hello,
this error is sometimes reported for network printers that do not report printer and ink status. How is your current printer setup:
- printer model
- connection by LAN or WiFi
- is the printer attached to a router or printer server?
And please open TurboPrint Control and find out the printer's "URI" (table of printers, column "URI")
this error is sometimes reported for network printers that do not report printer and ink status. How is your current printer setup:
- printer model
- connection by LAN or WiFi
- is the printer attached to a router or printer server?
And please open TurboPrint Control and find out the printer's "URI" (table of printers, column "URI")
Re: ERROR - No connection to turboprint deamon
Hello,
Epson L3156 - printer connects to a network via WiFi, URI: @IP adress of my printer. I use this printer with TurboPrint almost three years and before every thing was OK.
Epson L3156 - printer connects to a network via WiFi, URI: @IP adress of my printer. I use this printer with TurboPrint almost three years and before every thing was OK.
Re: ERROR - No connection to turboprint deamon
Please open TurboPrint Control, dialog "Edit" and configure your printer as follows:
Printer is: other printer
Connection: Network printer LPD
Server: <ip address of printer>
Printer: <leave empty>
then confirm with "Ok" and check in TurboPrint Monitor if you see printer and ink status.
Printer is: other printer
Connection: Network printer LPD
Server: <ip address of printer>
Printer: <leave empty>
then confirm with "Ok" and check in TurboPrint Monitor if you see printer and ink status.
Re: ERROR - No connection to turboprint deamon
Hi,
still the same bug
still the same bug
- Attachments
-
- Screenshot_20230906_192651.png (82.25 KiB) Viewed 23260 times
Re: ERROR - No connection to turboprint deamon
Please make sure that TurboPrint Daemon is enabled in TurboPrint Config:
Dialog "Settings" -> check "TurboPrint Monitor - start daemon when booting".
To start TPDaemon manually, you can use the following commands from a terminal window:
sudo service tpdaemon start
or
sudo tprintdaemon
(the login password will be requested).
Dialog "Settings" -> check "TurboPrint Monitor - start daemon when booting".
To start TPDaemon manually, you can use the following commands from a terminal window:
sudo service tpdaemon start
or
sudo tprintdaemon
(the login password will be requested).
Re: ERROR - No connection to turboprint deamon
TurboPrint Daemon is enabled in TurboPrint Config.
I also tray to run daemon manually, but bug is still present.
I also tray to run daemon manually, but bug is still present.
Re: ERROR - No connection to turboprint deamon
After I run TPDeamon manually I've got this bug: "usr/bin/tprintdaemon: symbol lookup error: /usr/bin/tprintdaemon: undefined symbol: _cups_strlcpy"
Re: ERROR - No connection to turboprint deamon
I'll send you an email with a new version of tprintdaemon for testing. It should solve the "symbol lookup error".
Re: ERROR - No connection to turboprint deamon
Hello,
i have the same problem with Tumbleweed:
2023-09-12T07:47:43.593405+08:00 tomslaptop tpdaemon[3889]: TP-Daemon Version 2.54-1
2023-09-12T07:47:43.593463+08:00 tomslaptop tpdaemon[3889]: Debug Level set to 0
2023-09-12T07:47:43.594044+08:00 tomslaptop tpdaemon[3883]: TurboPrint daemon started
2023-09-12T07:47:43.594116+08:00 tomslaptop TUSB_Daemon: TurboPrint Daemon installed successfully - (C)2007 ZEDOnet.
2023-09-12T07:47:43.605877+08:00 tomslaptop systemd[1]: Started Turboprint Monitor Daemon.
2023-09-12T07:47:44.160895+08:00 tomslaptop tpdaemon[3889]: DEBUG: Resolving "Canon G3000 series._printer._tcp.local"...
2023-09-12T07:47:44.161052+08:00 tomslaptop tpdaemon[3889]: STATE: +connecting-to-device
2023-09-12T07:47:44.161103+08:00 tomslaptop tpdaemon[3889]: DEBUG: Resolving "Canon G3000 series", regtype="_printer._tcp", domain="local."...
2023-09-12T07:47:44.165579+08:00 tomslaptop tpdaemon[3889]: DEBUG: Resolved as "lpd://68D4B8000000.local:515/auto"...
2023-09-12T07:47:44.165694+08:00 tomslaptop tpdaemon[3889]: STATE: -connecting-to-device,offline-report
2023-09-12T07:47:44.166111+08:00 tomslaptop tpdaemon[3889]: /usr/bin/tprintdaemon: symbol lookup error: /usr/bin/tprintdaemon: undefined symbol: _cups_strlcpy
2023-09-12T07:47:44.167688+08:00 tomslaptop systemd[1]: tpdaemon.service: Main process exited, code=exited, status=127/n/a
2023-09-12T07:47:44.167858+08:00 tomslaptop systemd[1]: tpdaemon.service: Failed with result 'exit-code'.
2023-09-12T07:47:44.512280+08:00 tomslaptop systemd[1]: tpdaemon.service: Scheduled restart job, restart counter is at 6.
2023-09-12T07:47:44.512861+08:00 tomslaptop systemd[1]: Stopped Turboprint Monitor Daemon.
2023-09-12T07:47:44.512992+08:00 tomslaptop systemd[1]: tpdaemon.service: Start request repeated too quickly.
2023-09-12T07:47:44.513076+08:00 tomslaptop systemd[1]: tpdaemon.service: Failed with result 'exit-code'.
2023-09-12T07:47:44.536390+08:00 tomslaptop systemd[1]: Failed to start Turboprint Monitor Daemon.
Can you pls send me the new version also?
Regards,
Thomas
i have the same problem with Tumbleweed:
2023-09-12T07:47:43.593405+08:00 tomslaptop tpdaemon[3889]: TP-Daemon Version 2.54-1
2023-09-12T07:47:43.593463+08:00 tomslaptop tpdaemon[3889]: Debug Level set to 0
2023-09-12T07:47:43.594044+08:00 tomslaptop tpdaemon[3883]: TurboPrint daemon started
2023-09-12T07:47:43.594116+08:00 tomslaptop TUSB_Daemon: TurboPrint Daemon installed successfully - (C)2007 ZEDOnet.
2023-09-12T07:47:43.605877+08:00 tomslaptop systemd[1]: Started Turboprint Monitor Daemon.
2023-09-12T07:47:44.160895+08:00 tomslaptop tpdaemon[3889]: DEBUG: Resolving "Canon G3000 series._printer._tcp.local"...
2023-09-12T07:47:44.161052+08:00 tomslaptop tpdaemon[3889]: STATE: +connecting-to-device
2023-09-12T07:47:44.161103+08:00 tomslaptop tpdaemon[3889]: DEBUG: Resolving "Canon G3000 series", regtype="_printer._tcp", domain="local."...
2023-09-12T07:47:44.165579+08:00 tomslaptop tpdaemon[3889]: DEBUG: Resolved as "lpd://68D4B8000000.local:515/auto"...
2023-09-12T07:47:44.165694+08:00 tomslaptop tpdaemon[3889]: STATE: -connecting-to-device,offline-report
2023-09-12T07:47:44.166111+08:00 tomslaptop tpdaemon[3889]: /usr/bin/tprintdaemon: symbol lookup error: /usr/bin/tprintdaemon: undefined symbol: _cups_strlcpy
2023-09-12T07:47:44.167688+08:00 tomslaptop systemd[1]: tpdaemon.service: Main process exited, code=exited, status=127/n/a
2023-09-12T07:47:44.167858+08:00 tomslaptop systemd[1]: tpdaemon.service: Failed with result 'exit-code'.
2023-09-12T07:47:44.512280+08:00 tomslaptop systemd[1]: tpdaemon.service: Scheduled restart job, restart counter is at 6.
2023-09-12T07:47:44.512861+08:00 tomslaptop systemd[1]: Stopped Turboprint Monitor Daemon.
2023-09-12T07:47:44.512992+08:00 tomslaptop systemd[1]: tpdaemon.service: Start request repeated too quickly.
2023-09-12T07:47:44.513076+08:00 tomslaptop systemd[1]: tpdaemon.service: Failed with result 'exit-code'.
2023-09-12T07:47:44.536390+08:00 tomslaptop systemd[1]: Failed to start Turboprint Monitor Daemon.
Can you pls send me the new version also?
Regards,
Thomas
Re: ERROR - No connection to turboprint deamon
Hi,
with new version of tprintdaemon every things works fine.
with new version of tprintdaemon every things works fine.
Re: ERROR - No connection to turboprint deamon
@zellmer: good to hear that it's working - thank you for the quick reply!
@funfactor: I will send you the new version of tprintdaemon by email
We will include the fix in the next TurboPrint release.
@funfactor: I will send you the new version of tprintdaemon by email
We will include the fix in the next TurboPrint release.
Re: ERROR - No connection to turboprint deamon
May I also have a copy of the working tprintdaemon?
When will the full new version be released?
Thank you.
When will the full new version be released?
Thank you.
Re: ERROR - No connection to turboprint deamon
The fixed version has been released in TurboPrint 2.55. Please write if you need a fixed executable for the older TurboPrint 2.54.
Re: ERROR - No connection to turboprint deamon
Yes, for the older TurboPrint 2.54 please.
Thank you,
Jeff
Thank you,
Jeff