Linearization curves and Fine Tuning at low level.
Posted: Thu Dec 16, 2010 7:56 pm
1. Is there an opportunity to elaborate on the possibilities of editing definition files in a folder printers and color? For example, for the possibility of overriding the ink sets such as this can be done in gutenprint. For example I have one of my R800 prints the ink set of R2400, that is, it prints not CMYKRB and CMYKcmk1k. I assure you, this possibility can significantly increase the attractiveness of your program!
2. How to linearize the printer using your program, ie linearize I will, for example by argyll, and that's where I need to insert or to prescribe the resulting linearization curves? Of course I can put them in a profile, but A) is able to work with embedded profile curves PrintFab CMS? - B) not really want to do this and because of the fact that not all programs understand this tag.
3. Well, I really question the printer control with your program at the lowest level: what about the possibility of calibration relations droplets of different sizes. Of course, I'm talking about Epson. That is about the ratio of small droplets to large and middle drops at large.
4. Just a question about low-level print management. Is it possible to control / management of relationships lights ink to the solid inks, ie, lights transitions?
Thanks in advance for any answers!
2. How to linearize the printer using your program, ie linearize I will, for example by argyll, and that's where I need to insert or to prescribe the resulting linearization curves? Of course I can put them in a profile, but A) is able to work with embedded profile curves PrintFab CMS? - B) not really want to do this and because of the fact that not all programs understand this tag.
3. Well, I really question the printer control with your program at the lowest level: what about the possibility of calibration relations droplets of different sizes. Of course, I'm talking about Epson. That is about the ratio of small droplets to large and middle drops at large.
4. Just a question about low-level print management. Is it possible to control / management of relationships lights ink to the solid inks, ie, lights transitions?
Thanks in advance for any answers!