Search found 2067 matches

by zedonet
Thu Dec 01, 2022 10:24 am
Forum: Other
Topic: What limitations once test period is over
Replies: 1
Views: 24

Re: What limitations once test period is over

Hello Johnny, after the end of the trial a "TurboPrint" logo is printed on the page, so you can only use it for testing, not for real prints.
by zedonet
Tue Nov 29, 2022 11:04 am
Forum: Installation
Topic: Upgrading my Mac OS. Will I have issues?
Replies: 2
Views: 47

Re: Upgrading my Mac OS. Will I have issues?

Hello cabezon37, often new security mechanisms of new macOS versions require adaptions in PrintFab, thus older PrintFab versions often cannot be used on the latest macOS release. You will probably need an update for using PrintFab on Catalina or Big Sur. Note that an update of your license key allow...
by zedonet
Wed Nov 23, 2022 4:57 pm
Forum: Printers & Applications
Topic: Halftone Printing Settings for transparency
Replies: 9
Views: 13716

Re: Halftone Printing Settings for transparency

Hello Kees,

if you select "multi black" and enable three inks, the inks will be printed 33/33/33 percent. Currently there is no way to change this .

PrintFab bypasses all Epson driver software, the Epson driver doesn't interfere with the halftoning.
by zedonet
Mon Nov 21, 2022 3:07 pm
Forum: Printers & Applications
Topic: Halftone Printing Settings for transparency
Replies: 9
Views: 13716

Re: Halftone Printing Settings for transparency

If you are printing pre-halftoned black-and-white images, I recommend to set "Halftone Screen Mode"="Single Black (no halftone)" (or "All Black (no halftone)" for an all black cartridge set). This is a new option that was introduced in PrintFab 2.97-4. The setting "...
by zedonet
Mon Nov 21, 2022 11:33 am
Forum: Tips & Tricks
Topic: maximum print size on roll
Replies: 2
Views: 93

Re: maximum print size on roll

Hello victorgv,

the R1900 driver in TurboPrint and PrintFab has a length limit of 129 inches (327cm) - is that length enough for your purposes? This limit can be extended by changing a config file, let me know if you need to produce longer prints.
by zedonet
Fri Nov 04, 2022 4:22 pm
Forum: Printers & Applications
Topic: Pixma Pro 9000 MKII PrintFab 2.97-4
Replies: 1
Views: 19

Re: Pixma Pro 9000 MKII PrintFab 2.97-4

Hello, I just answered by email: Auto-Select The setting "Auto-Select" is something that macOS adds (and that the PrintFab driver cannot remove), this setting is a "duplicate" of the setting "Automatic Feed" which means the automatic sheet feeder at the top of the print...
by zedonet
Thu Nov 03, 2022 7:52 pm
Forum: Printers & Applications
Topic: Pixma Pro 9000 "quality"
Replies: 2
Views: 23

Re: Pixma Pro 9000 "quality"

The PrintFab printer driver for the Canon Pro 9000 specifies the highest resolution as "9600dpi" for glossy/semiglossy media and "4800dpi" for the other media. Internally, the printer works with an addressable resolution of up to 1200x1200dpi - multiplied by a possible number of ...
by zedonet
Thu Nov 03, 2022 9:29 am
Forum: Printers & Applications
Topic: Illustrator 27.0 not working with PrintFab
Replies: 2
Views: 66

Re: Illustrator 27.0 not working with PrintFab

Hello, have you checked if it is the custom page size problem that is discussed in this thread https://www.turboprint.info/support/viewtopic.php?p=16619 this may be an appication specific problem. If you are printing from Adobe Illustrator: The page size setting "Custom" in the Illustrator...
by zedonet
Mon Oct 31, 2022 11:34 am
Forum: Announcements
Topic: PrintFab 2.95 with support for macOS 11 Big Sur
Replies: 6
Views: 1899

Re: PrintFab 2.95 with support for macOS 11 Big Sur

Hello, we have not yet tested the TM-200 - probably it will work with the TM-300 driver but we do not know if there are any other differences besides the smaller printing width. If you are interested, you can just download the free 30-day trial version of PrintFab. It works without any limitations f...
by zedonet
Fri Oct 14, 2022 11:52 am
Forum: Installation
Topic: Printer does not print
Replies: 1
Views: 297

Re: Printer does not print

I have just answered by email:
The wrong printer driver has been selected ("Epson Stylus Pro" which is a very old printer).

Please open the "PrintFab Toolbox", delete the printer entry and add it again, this time select the printer driver "Epson Stylus Pro 9800".
by zedonet
Fri Oct 14, 2022 9:20 am
Forum: Printer specific questions
Topic: Epson L6490 not support
Replies: 1
Views: 439

Re: Epson L6490 not support

Hello,

you could try the TurboPrint driver "Epson EcoTank ET-3700" as a replacement driver. If you try this driver, please le me know if it works.
by zedonet
Fri Oct 14, 2022 9:00 am
Forum: Installation
Topic: Epson ET-2810, Mint 20.3 - Print job sent but not printing
Replies: 1
Views: 294

Re: Epson ET-2810, Mint 20.3 - Print job sent but not printing

Hello, most of the files that you sent look good, the log file that should contain the relevant information to solve the problem is /var/log/print.log but it is empty, so it looks as if the TurboPrint driver was never executed. In this case the file /var/log/cups/error_log should contain error messa...
by zedonet
Wed Oct 05, 2022 9:43 am
Forum: Printers & Applications
Topic: Turboprint will not print to Canon iP90
Replies: 6
Views: 197

Re: Turboprint will not print to Canon iP90

Hello and please excuse the late answer! It is good to hear that you already solved the problem with printing. About the online documentation: Maybe you can open it from Opera by navigating to the directory where the help files are located: /usr/share/turboprint/doc/html_de/index.html The documentat...
by zedonet
Thu Sep 15, 2022 8:59 am
Forum: Printers & Applications
Topic: Turboprint will not print to Canon iP90
Replies: 6
Views: 197

Re: Turboprint will not print to Canon iP90

Hello Jim, I am sorry that you encountered problems installing and using TurboPrint. I am not sure where the problem is, but I would recommend to uninstall the .deb package in the Ubuntu Software app and then try installation from Terminal window using the .tgz archive of TurboPrint - this way you h...
by zedonet
Mon Sep 12, 2022 8:57 am
Forum: Color management
Topic: When I use PrintFab my Epson 2710 only prints magenta?
Replies: 1
Views: 78

Re: When I use PrintFab my Epson 2710 only prints magenta?

Hello, it looks as if Cyan and Yellow ink is missing because the print head is clogged or there is a problem with the ink cartridges. Performing the print head cleaning procedure via PrintFab Toolbox or directly at the printer might help. Can you please print a nozzle test page (PrintFab Toolbox -> ...