TurboPrint & PrintFab

Thanks. I tried printing on photo paper with "photo magenta" and "photo cyan" set to 0%. It did remove the blue cast (see attached photo). I then tried setting just photo cyan to 0%. That was still blue, although not as much (see same attachment). I want to use all the colors in ...

Hi, Thanks for your reply. I have attached a photo of the nozzle check page. I have also pasted the print log for a 4x6 glossy print that had a blue cast below this message. The blue cast is still there on plain paper prints, but it might be less severe. I have attached two plain paper prints: -a si...

I'm using Ubuntu and Turboprint to print with a Canon i9900 onto Canon photo paper. After printing with good results as recently as two weeks ago, my prints are now all tinted blue/cyan when using Turboprint. It shows up in, for example, the whites of the eyes which should have no ink at all. See at...

This appears to have been the issue (using 8 x 10 paper with the "borderless" setting).

I used the 8 x 10 paper again, but did not print it as borderless, and the problem was gone (the image was not warped).

Thanks,

Chris Gregerson

Hi, The printer model is a Canon i9900. The 8x10 paper size is a "custom" paper size, as there is no pre-set option for that size. Below are the settings in the paper size dialog box (I've had this problem before with standard paper sizes, and also with a Canon s900 I had previously). http...

Turboprint 2.21-1 under Linux is producing a stretched image with bizarre colors when using PP101, PR101, and GP301 papers (at 8x10 size). Here is the original image: http://www.cgstock.com/images/turboprint_image.jpg Here is the print preview in Bibble: http://www.cgstock.com/images/turboprint_bibb...