TurboPrint & PrintFab

If turboprint daemon is not running directly after installation of TurboPrint, it should be running after a Linux reboot. You can also try to start it manually by entering sudo /etc/init.d/tpdaemon start in a terminal window. Please let me know if an error is reported and if TurboPrint Monitor still...

Hello,

thank you for your feedback!

does this occur in "borderless" mode?
What is the page size (e.g. A4, Letter, 4x6inch, 10x15cm)?
What is the media type?

Hello,

could you send me the log file /var/log/turboprint/print.log after such a print - please email to

mailt (a) turboprint (dt) de

thank you!

Hello,

can you install the new version TurboPrint 2.07-1 and test if the problem persists?

Hello jpchretien, it sounds like in your TurboPrint installation some files have not been installed but instead some old TurboPrint 1 files are still present. Please uninstall TurboPrint 2, then check if the directory /usr/share/turboprint is removed. If not, you could remove it manually. Then reins...

Hello, I have received the log file via email - unfortunately I still cannot find the reason for the problem. What you could try: In the print dialog, "PrintFab Settings", switch off the option "Use ghostscript as postscript interpreter". This might help if it is a postscript rel...

Hello,

thank you for testing!

Can you tell me in which way the print is "off" - e.g. "moved by 0.5 inches to the left and by 0.7 inches to the top"?

Hello vbj, as TurboPrint V1 is no longer supported, we do not supply older versions as download. However, printing on CD should work without any problems on your IP6600D with TurboPrint 2. What problems did you encounter when printing on CD with TP2? Please also check if TurboPrint Monitor shows any...

Hello,

it seems that changes for newer DesignJet printers cause the problem - I will send you a corrected driver by email.

Hello,

unfortunately there is no TurboPrint driver or compatible driver available from us.

Hi,

there is no need to compile the BJNP package yourself - it is already included in the current version of TurboPrint.
Regarding the initial post in this thread: the Canon MX850 is fully supported by TurboPrint.

Hello, the profile chart must be printed with TurboPrint - different printer drivers apply slightly different amounts of ink, so if you are printing the test chart under Windows, you cannot use the ICC profile with TurboPrint. Please follow the instructions provided in the PDF manual for TurboPrint,...

Hello gimmejimmy, as we do not know any method to reset the ink waste pad counters programmatically, I see no way to include that into TurboPrint. However, there might be a way to reset these counters directly on the printer - I know that on Canon printers you can reset that counters with a certain ...

Hello emidwood,

which Postscript interpreter are you using? You problem might be caused by the ghostscript interpreter - please try to switch to the internal OS X interpreter. This can be done in PrintFab settings by unchecking the "use Ghostscript" option.
Does that change anything?

Hello Ljordan,

which version of TurboPrint 2 have you installed? The mentioned problem was known with previous versions but should not appear with the current v2.06.