TurboPrint & PrintFab

Hello, I understand that you can print with PrintFab, but the "Preview and Layout Editor" no longer appears - please write if you have a different problem. Please check: 1) in the PrintFab driver settings, the checkbox "Print Preview / Layout Editor" must be set activated 2) in W...

Hello, we recommend the following settings for printing film positives with the Epson L1300 printer: "PrintFab Settings", Tab "Main": "Media Type" = "Transparency" "Quality" = "2880dpi" "Printer Features" -> "Special Settings...

Hello, thank you for sending the files. This seems to be a general problem either in Illustrator or maybe also in the workflow that is not specific to PrintFab. I tried to print the separations directly to a Postscript laser printer and process black prints an empty page except for the registration ...

Yes, please send a sample DCS file and / or a sample Illustrator document. You can send the dropbox link to mail (at) zedonet (dot) com .

Hello hodger,

yes, you can choose Paypal or credit card payment in the online shop.

Hello mattiwbln, actually only certain page sizes support borderless printing. This is because the printer has special ink absorbing sponges only at certain positions where the ink that is printed next to the paper is soaked up. If the page ends at a different position where no absorber is present, ...

Hello, we are now working on the Pro-300 driver and it should be included in the next TurboPrint version early next year.

Hello, setting the ink limit before creating the ICC profile actually limits to 150. The slider "Total Ink Maximum" in the PrintFab settings allows to adjust this value. The user interface shows 200..400% with a default of 300%. If you chose 150% when creating your profile, this is interna...

Hello, only older Canon printers can be recommended for screen printing. The reason is that older Canon printers that were introduced up to approx. 2018 allow direct control of each ink cartridge, allowing to apply more ink. Newer models are controlled in "RGB mode", the printer firmware c...

Hello ramestica,

normally all valid ICC files should work. Difficult to say why your ICC profile was not accepted - if you send it by email, we can check what the problem is. (to mail * zedonet * de, replace * by "@" and ".").

I am not sure if you can select between some of the possible print qualities / output resolutions.
Which options can you see in the driver?

Thank you for sending photos of the nozzle check page. It looks as if the black UV ink is not good for the fine print head nozzles - they are temporarily or permanently clogged. I could email you a modified driver file that disables the fine nozzles as a "workaround". If you are interested...

Hello, from a Windows client, you may see the "rendering resolution" (300dpi or 600dpi - the base resolution for the Windows operating system) instead of the actual print resolution (300dpi to 9600dpi, depending on the printer model - the resolution of print data sent to the printer). Can ...

Hello,

the message can be ignored. There is a check for KDE components during installation of TurboPrint. Ubuntu does not uses Gnome instead of KDE desktop.

Hello,

I'll send you an experimental driver file for longer print length by email.