TurboPrint & PrintFab

Hello, yes, this is correct. You can use the following soft proof profiles: Photo Paper Plus Glossy II - PP-301 => TS9500-canon_pp201.icc Glossy Photo Paper - GP-701 => TS9500-canon_gp501.icc This is a good approximation. Of course you can use our profiling service to create an individual color prof...

Hello, the printing settings "presets" are a mechanism of macOS, not PrintFab. In our experience the presets work reliably - if a "preset" is selected in the macOS print dialog, the corresponding settings are also used for the next print job. A known problem is that macOS sometim...

Hello,

generally, printing halftones with PrintFab Pro XL works also on Ventura.

Can you describe your problem - e.g. you cannot find the dialog "Special settings screen printings"?

The sorting may be a bit confusing, at the top are RPM and TGZ downloads and at the end the DEB downloads. The oldest TurboPrint version that is currently available is 2.36-1 from 2015.

Hello JBassett22,

you can still download previous releases of TurboPrint from our Webserver:

https://www.zedonet.com/download/tp2

Note that some older releases are no longer compatible with current Linux OS versions

Hello Alex, in the PrintFab driver for the Epson ET-2850, the setting Transparency prints with "composite black" = Cyan+Magenta+Yellow. Please select "Paper"="Epson Matte Heavy" instead, this media setting will cause pigmented black ink to be used instead. The ET-2850 p...

Hello, the "system error 79:04" may occur when printing at the highest resolution (2400dpi). Printing at 300-1200dpi should work.

Please let me know if this solves the problem.

Hello Johnny, after the end of the trial a "TurboPrint" logo is printed on the page, so you can only use it for testing, not for real prints.

Hello cabezon37, often new security mechanisms of new macOS versions require adaptions in PrintFab, thus older PrintFab versions often cannot be used on the latest macOS release. You will probably need an update for using PrintFab on Catalina or Big Sur. Note that an update of your license key allow...

Hello Kees,

if you select "multi black" and enable three inks, the inks will be printed 33/33/33 percent. Currently there is no way to change this .

PrintFab bypasses all Epson driver software, the Epson driver doesn't interfere with the halftoning.

If you are printing pre-halftoned black-and-white images, I recommend to set "Halftone Screen Mode"="Single Black (no halftone)" (or "All Black (no halftone)" for an all black cartridge set). This is a new option that was introduced in PrintFab 2.97-4. The setting "...

Hello victorgv,

the R1900 driver in TurboPrint and PrintFab has a length limit of 129 inches (327cm) - is that length enough for your purposes? This limit can be extended by changing a config file, let me know if you need to produce longer prints.

Hello, I just answered by email: Auto-Select The setting "Auto-Select" is something that macOS adds (and that the PrintFab driver cannot remove), this setting is a "duplicate" of the setting "Automatic Feed" which means the automatic sheet feeder at the top of the print...

The PrintFab printer driver for the Canon Pro 9000 specifies the highest resolution as "9600dpi" for glossy/semiglossy media and "4800dpi" for the other media. Internally, the printer works with an addressable resolution of up to 1200x1200dpi - multiplied by a possible number of ...

Hello, have you checked if it is the custom page size problem that is discussed in this thread https://www.turboprint.info/support/viewtopic.php?p=16619 this may be an appication specific problem. If you are printing from Adobe Illustrator: The page size setting "Custom" in the Illustrator...