TurboPrint & PrintFab

Has nothing to do with our drivers

Sound a bit like something I experienced: If the reset line of the printer is drawn permanently while the computer is on (defective parallel port or cable), the printer will look like switched off (all LEDs off).

Yes, in the free version of TurboPrint only the lowest print quality can be used without a "TurboPrint" logo being added. Low print quality will not produce deep black and brilliant colors. However you can test higher print quality by selecting it in TurboPrint Config (of course in this ca...

Thank you for your request! The successor to Epson C86 is called "D88" in Germany. Please try the driver "Epson Stylus D88" and let me know if it works - thank you!

I will check the head alignment procedure. (Note: it is also possible to do the alignment from the Windows driver - the alignment values are stored in the printer). The ink check will not work as long as there is a "stuck" print job from the alignment process in the print queue. It should ...

Nothing is known yet. It may be caused by the OS X updater if it works again after a new installation of PrintFab.

No TurboPrint driver is available or planned for this printer.

Thank you for the feedback - it was just a try. I will let you know when we have a driver for this printer.

The new version PrintFab 2.05 is now available. It includes additional printer drivers for the following printer: Canon PIXMA iX4000, iX5000, iP90i, iP1700, iP3300, iP4300, iP5300, iP6600D, iP6700D Canon PIXMA MP160, MP180, MP460, MP510, MP600, MP600R, MP810 Epson Stylus Pro 4800, 7800, 9800 HP Phot...

A driver for Canon PIXMA MP450 is now included in the new PrintFab 2.05 (should have already be included with PrintFab 2.04).

The download is available on

http://www.printfab.net

Hello,

the TurboPrint driver "Canon PIXMA iP6700D" might work - if you try it, please let me know the results.

Hello! Depending on the paper setting only the PGI5 pigment black or CLI8 photo black is used: plain paper => pigment black; all other media => photo black. You can choose print mode = "Black & White" or "Greyscale" in TurboPrint Config to make sure that only the black cartri...

This may be the case if there is no black cartridge in the printer - black is grey (mixed out of cyan, magenta & yellow ink). Which kind of paper do you print on - plain paper or matte inkjet paper or glossy inkjet paper?

Hello!

The print queue is stopped if an error occurs. There are several possible reasons, but it might be a network problem. You could try to switch to a different network protocol, e.g. "Socket".

Also you could post /var/log/cups/error_log after this happens.

Hello, please open "printer setup utlity" and open the status window for this printer (double click on the entry). If you get an error message like "NT_STATUS_ACCESS_DENIED" you may have to set up the printer again and supply an additional user name & password - if the printe...

Hello,

thank you for the feedback!

1. will be solved by a status monitor daemon - we are working on it

2. no simple solution is known. It might be possible to set a status text string that is displayed in the Windows print queue window. I will think about it.