Paper sizing inquiry

Questions on Installation
Post Reply
Rael
Posts: 7
Joined: Sun Feb 01, 2009 9:48 pm

Paper sizing inquiry

Post by Rael » Sun Dec 06, 2009 9:19 pm

Hi,

I purchased the Turboprint drivers for Linux with the extra large paper size feature about two years ago. Although it's quite complete, I have a need for printing a custom size, 17" wide X 84" long for a window drape on roll fabric.

I'm using GIMP to open the file and send it to print, but within GIMP, the turboprint feature only has set sizes to print under, and the image is scaled accordingly to US C, Borderless Panorama etc.

Is there a way to print the custom size I need using turboprint?

zedonet
Site Admin
Posts: 1783
Joined: Fri Oct 06, 2006 8:02 am

Post by zedonet » Mon Dec 07, 2009 10:23 am

Hello,

you can define a new custom page size in TurboPrint Control Center, button "Sizes". Then GIMP must be restarted so that the new size will be available in the print dialog.

I recommend to download & install the current TurboPrint version 2.12-1 as there were problems with very large print sizes in the previous version 2.11.

Note: A print length or 84 inches is only possible for certain printers - which printer do you use?

Rael
Posts: 7
Joined: Sun Feb 01, 2009 9:48 pm

Post by Rael » Fri Dec 11, 2009 5:38 am

it's an Epson 4800 Pro. Thank you for the instructions, I'll try 2.11 shortly, and if it has an issue I'll look at 2.12-1. Is 2.12-1 a free upgrade, or a separate driver?

zedonet
Site Admin
Posts: 1783
Joined: Fri Oct 06, 2006 8:02 am

Post by zedonet » Fri Dec 11, 2009 9:03 am

Hello,

TurboPrint 2.12 is a free update. However, not all new printer drivers that have been added in this version may be usable (depending on the option that you have chosen for "free upgrades").

Rael
Posts: 7
Joined: Sun Feb 01, 2009 9:48 pm

Post by Rael » Mon Jan 25, 2010 5:22 pm

Hi, could you provide the link to download the latest update? I don't remember what I selected for free upgrades when I bought the driver a couple years ago.

When I'm in the turboprint control center, I don't see a "size" button, I have a "layout" tab where there are a number of standard "pagesizes" but no option for defining my own. Is there another place I should be looking?

I was able to define my own page size inside of GIMP, but after closing and restarting GIMP and turboprint, the custom size wasn't picked up by turboprint. Again, any suggestions would be helpful.

zedonet
Site Admin
Posts: 1783
Joined: Fri Oct 06, 2006 8:02 am

Post by zedonet » Tue Jan 26, 2010 8:19 am

Start TurboPrint Control Center with the desktop icon "TurboPrint Control" or from a terminal window with the command "turboprint" - then you will see the "Sizes" button.

EDIT:

If you have version TurboPrint 1.x installed, you need an update to TurboPrint 2 to get the custom page size editor. TurboPrint 2.x is not a free update - you need to purchase an update license in our online shop (www.turboprint.info -> "Buy online"). Before purchasing the update you can install it as a 30 day trial to verify functionality - download from www.turboprint.info -> link "Download".

Post Reply