"Clean Print Heads" & "Show ink Status&q

Post Reply
shefi
Posts: 5
Joined: Sun Mar 04, 2007 5:41 pm

"Clean Print Heads" & "Show ink Status&q

Post by shefi » Thu Apr 05, 2007 7:10 am

ToolBox "Clean Print Heads" & "Show ink Status"
On my G5Dual2ghz with Dlink DI-524UP + Canon Pixma ip1500 it does not work.
(printfab 2.0.5)
Any idea why?

I need to disconnect the usb cable and connect it directly to the Mac if I need to do some maintenece.

I bought the PrintFab (and the DI-524UP) to avoid manually reconnecting the printer each time....

This one should be fixed![/img]
shefi

zedonet
Site Admin
Posts: 1777
Joined: Fri Oct 06, 2006 8:02 am

Post by zedonet » Thu Apr 05, 2007 10:54 am

Hello,

"show ink status" will only work for local connection (bidirectional communication not supported with most network protocols & printer servers).

All other maintenance tasks work also for network printers, so "clean print heads" should work. Does "nozzle check test page" work?

shefi
Posts: 5
Joined: Sun Mar 04, 2007 5:41 pm

"nozzle check test page" is working!

Post by shefi » Thu Apr 05, 2007 11:29 am

YES ! I checked again and now "nozzle check test page" is working under network connection.
shefi

Post Reply