Maximum paper length

Questions on certain printers and applications
Post Reply
Timothy Larkin
Posts: 1
Joined: Mon Sep 02, 2013 4:03 pm

Maximum paper length

Post by Timothy Larkin »

I seem to be missing something that is probably quite obvious, from some point of view which I have not yet attained.

The descriptions of the software options explicitly state the maximum page width that each option supports. But I don't see any information on the maximum possible length. I have a Stylus Pro 3880. How long a print can I make under each of the software options?
zedonet
Site Admin
Posts: 2156
Joined: Fri Oct 06, 2006 8:02 am

Re: Maximum paper length

Post by zedonet »

Hello,

the versions "PrintFab Home L" and "PrintFab Pro" support printers up to 15 inch print width, "PrintFab Pro XL" also supports larger printers.

Print length is only limited by the printer itself. Most printers limit maximum print length in printer firmware so the driver cannot increase print length.

The Epson Stylus Pro 3880 printer seems to be a special case - the maximum print length specified by Epson is 37,4 inches, however we have a customer who prints banners with up to 150 inches length with PrintFab. I cannot tell if this works reliably (paper may tend to get skewed).
Post Reply