Ink Control not working

Post Reply
ConnyO
Posts: 9
Joined: Thu Apr 24, 2008 7:22 pm

Ink Control not working

Post by ConnyO »

I'm trying PrintFab 2.09 on my G5 in Leopard with an Epson Photo 1400.
My goal is to make an icc-profile but I can't get the Ink Control to work. Not Total Ink Maximum or Black Level (UCR). I can change the values but all prints come out the same. Maybe I have missunderstood something?
zedonet
Site Admin
Posts: 2156
Joined: Fri Oct 06, 2006 8:02 am

Post by zedonet »

Hello,

the UCR setting is only effective for PrintFab profiles, not for ICC profiles. For ICC profiles, UCR / black generation is determined by the software used to generate the ICC profile.

Before creating an ICC profile choose a suitable maximum ink saturation in TurboPrint Toolbox.

The "Total Ink Maximum" slider in the print dialog can be used to reduce ink saturation when printing with this profile.
ConnyO
Posts: 9
Joined: Thu Apr 24, 2008 7:22 pm

Post by ConnyO »

Thank you, I will try again!
Post Reply