Epson 9800

Other questions
Post Reply
johnxe22
Posts: 1
Joined: Mon Jun 06, 2011 7:27 pm

Epson 9800

Post by johnxe22 »

Hi, not sure where to post this question. I have an Epson 9800 printer and am using OS 10.4.11 on a Mac. I need to:

1. Have a RIP that will allow me to exceed the 90.5" length of the Epson drivers
2. Print up to 44 inches wide with 310 gsm paper
3. Use the icc profile that i am currently using with certain Canson and Hahnamule papers
4. Do all of the above from within Photoshop CS4 and perhpas also outside of Photoshop if CS4 has a maximum pixel limit.

I really don't need or think i need any other features beyond that. Will PrintFab do all of the above for me> If so which version do i need to purchase.

Thanks,


john
zedonet
Site Admin
Posts: 2156
Joined: Fri Oct 06, 2006 8:02 am

Re: Epson 9800

Post by zedonet »

(some of these questions have already been answered directly be email)

Hello,

1. should be possible - the maximum print size is not limited by PrintFab and the printer can print up to 44" x590" on roll paper
2. depends on the paper, but should not be a problem
3. new profiles must be created for PrintFab - the ink mixture (light vs dark inks) and the linearization is different.
Creating profiles can be easily done using our profiling service.
4. as far as I know, Photoshop CS4 has a maximum pixel and print size limit - maybe it is possible to print from OS X "preview"
Post Reply