Printer state Processing.... but never prints

khuegele · Post by **khuegele** » Sat Jul 07, 2007 1:43 am

Hello,
I tried to send print jobs from different applications, (Firefox, Kate, and OpenOffice) and KJobViewer reports the state of current job as processing... but the job never prints.

I tried to print a test page from TurboPrint Setup and Config applications, and both printed successfully.

I am using Kubuntu Fiesty Fawn 7.04, 64 bit AMD processor. Canon i960.

Please help!

Post by **zedonet** » Mon Jul 09, 2007 9:31 am

Hello,

printing from these applications should work. You could post the log file /var/log/turboprint_cups after trying to print (only section of last print job).

khuegele · Post by **khuegele** » Thu Jul 12, 2007 1:05 pm

Hello,
Thank you for your help. Here is the last part of my turboprint_cups log:

#######################################################
NEW PRINT JOB Thu Jul 12 07:36:33 CDT 2007 (pstoturboprint 1.95-1)
job-id 40
user karin
title RECIPE TO COOK Mollie Katzen's Fried green Tomato Pillows, a Vegetarian Recipe
copies 1
options cpi=10 lpi=6 job-uuid=urn:uuid:c6c9642e-0398-3d42-5c4f-03b01a1f9ecf
file
test directory access:
drwxr-xr-x 2 karin karin 16384 May 24 17:07 /usr/share/turboprint/printers
libm.so.6 => /lib/libm.so.6 (0x00002aea359f9000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aea35c7b000)
libc.so.6 => /lib/libc.so.6 (0x00002aea35e89000)
/lib64/ld-linux-x86-64.so.2 (0x00002aea357dc000)
/usr/bin/tpprint -v2 -l/var/log/turboprint_cups.log --ppdfile=/etc/cups/ppd/Canon.ppd --psfeatures /tmp/pstoturboprint16135.chunk /tmp/pstoturboprint16135.var
Searching PPD file and postscript header for options...
----------- Start of var file -----------
ZEDOPARM="$ZEDOPARM zedoPageRegion=A4"
ZEDOPARM="$ZEDOPARM zedoMediaType=Plainpaper_6"
ZEDOPARM="$ZEDOPARM zedoInputSlot=AutomaticFeed"
ZEDOPARM="$ZEDOPARM zedoColorModel=RGB"
ZEDOPARM="$ZEDOPARM zedoDithering=ErrorDiffusion"
ZEDOPARM="$ZEDOPARM zedoMirror=0"
ZEDOPARM="$ZEDOPARM zedoDuplexAdjust=0"
ZEDOPARM="$ZEDOPARM zedoIntensity=0"
ZEDOPARM="$ZEDOPARM zedoBrightness=0"
ZEDOPARM="$ZEDOPARM zedoContrast=0"
ZEDOPARM="$ZEDOPARM zedoColorCorrection=1"
ZEDOPARM="$ZEDOPARM zedoUserColor=0"
ZEDOPARM="$ZEDOPARM zedoGamma=180"
ZEDOPARM="$ZEDOPARM zedoColorY=0"
ZEDOPARM="$ZEDOPARM zedoColorM=0"
ZEDOPARM="$ZEDOPARM zedoColorC=0"
ZEDOPARM="$ZEDOPARM zedoColorK=0"
ZEDOPARM="$ZEDOPARM zedoGamut=0"
ZEDOPARM="$ZEDOPARM zedoResolution=600x600dpi_1"
ZEDOPARM="$ZEDOPARM zedoDuplex=None"
ZEDOPARM="$ZEDOPARM zedoPrinterDriver=Canon_i960"
GSPPDFOUND=1
GSCOLORMODE=2
GSXDPI=600
GSYDPI=600
GSWIDTH=4960
GSHEIGHT=7015
TPWIDTH=8268
TPHEIGHT=11693
TPXOFFSET=0
TPYOFFSET=0
DUPLEX=0
PREVIEW=0
PVXDPI=10
PVYDPI=10
PVWIDTH=88
PVHEIGHT=125
----------- End of var file -----------
GSCOMMANDLINE=gs -sDEVICE=pcx24b -r600x600 -g4960x7015 -dSAFER -dNOPAUSE -dBATCH
TPCOMMANDLINE=/usr/bin/tpprint -a0 -e1 -s8268x11693 -v2 -l/var/log/turboprint_cups.log ---cpi=10 ---lpi=6 ---job-uuid=urn:uuid:c6c9642e-0398-3d42-5c4f-03b01a1f9ecf --ppdfile=/etc/cups/ppd/Canon.ppd --psheader=/tmp/pstoturboprint16135.chunk --jobid=40 --username=karin '--title=RECIPE TO COOK Mollie Katzen's Fried green Tomato Pillows, a Vegetarian Recipe'
COMPLETEPIPE=/usr/share/turboprint/lib/tpstdin --paste /tmp/pstoturboprint16135.chunk | gs -sDEVICE=pcx24b -r600x600 -g4960x7015 -dSAFER -dNOPAUSE -dBATCH -sOutputFile=/tmp/pstoturboprint16135.fifo - >> /var/log/turboprint_cups.log
----------- Start of print job -----------
ESP Ghostscript 815.04 (2007-03-14)
Copyright (C) 2004 artofcode LLC, Benicia, CA. All rights reserved.
This software comes with NO WARRANTY: see the file PUBLIC for details.
job cancelling procedure - TPPID= GSPID=16160
------------ END of tpprint filter ------------

Post by **zedonet** » Mon Jul 16, 2007 10:13 am

Hello,

there is a bug in the "pstoturboprint" filter - documents that have an apostrophe /quote (' / ") in the document title are not printed

This will be fixed in the next release. You can use the beta version in the mean time

ftp://ftp.zedonet.com/turboprint-1.95-3beta.tgz

khuegele · Post by **khuegele** » Mon Jul 16, 2007 12:46 pm

Thank you for your help!
I suppose you don't have a .deb package as yet for the beta version that I can download?

Post by **zedonet** » Wed Jul 18, 2007 10:16 am

Das .deb-Paket fÃ¼r die endgÃ¼ltige Version 1.96 ist jetzt verfÃ¼gbar unter www.turboprint.de/download.html

khuegele · Post by **khuegele** » Wed Jul 18, 2007 3:34 pm

Haben Sie Version-1.96 64-bit .deb bis jetzt freigegeben?
Die 64-bit download seite scheint, .deb fÃ¼r Version 1.95-2 nur zu haben.
Vielen Dank fÃ¼r Ihre Hilfe!