Page 1 of 1

TurboPrint 2.50 with new printer drivers

Posted: Wed Jul 15, 2020 7:56 am
by zedonet
TurboPrint 2.50 released with the following new printer drivers:
.
- Canon imagePROGRAF Pro-4000, TM-300
- Epson SC-T2100, SC-T3100, T3100X, T5100, SC-F500, SC-F570

and the following fixes in printer drivers:

- borderless printing sometimes not working on Epson ET-2700/2750; fixed
- highest print resolution not working on Epson ET-4500; fixed
- large page formats not working on HP DesignJet T120; fixed

The complete change log can be found at
http://www.turboprint.info/history.html

For a list of supported printers please visit
http://www.turboprint.info/printers.html

Re: TurboPrint 2.50 with new printer drivers

Posted: Wed Jul 15, 2020 4:04 pm
by EdoNork
Hello,

I have just install the 2.50 version (Manjaro Linux with KDE TP applet) and TurboPrint Monitor is not launched at printing as it should (I always preview before sending to printer). Preview is selected on TP Monitor.
If I start Monitor from the applet, it works the very first time, when closing the window, it refuses to open again using the applet, but I can open it using TurboPrint Control.

Any clue to solve?

Regards,
Iñigo.

Re: TurboPrint 2.50 with new printer drivers

Posted: Sat Jul 25, 2020 4:12 am
by EdoNork
zedonet?

Re: TurboPrint 2.50 with new printer drivers

Posted: Tue Jul 28, 2020 4:44 pm
by zedonet
Hello,

thank you for your problem report.
No such problems with TurboPrint Monitor have been noticed by us or have been reported to us for the current TurboPrint version 2.50.

Is this problem new for TurboPrint 2.50, i.e. was TurboPrint 2.49 working properly on the same version of Manjaro Linux?

Which version of Manjaro Linux do you use?

Re: TurboPrint 2.50 with new printer drivers

Posted: Wed Jul 29, 2020 6:37 pm
by EdoNork
Hello,

Manjaro KDE Edition:

Operating System: Manjaro Linux
KDE Plasma Version: 5.19.3
KDE Frameworks Version: 5.72.0
Qt Version: 5.15.0
Kernel Version: 5.7.9-1-MANJARO
OS Type: 64-bit
Processors: 12 × Intel® Xeon® CPU X5690 @ 3.47GHz
Memory: 23.5 GiB of RAM
Graphics Processor: GeForce RTX 2060/PCIe/SSE2

Previous versions of TP worked without any issue.

Re: TurboPrint 2.50 with new printer drivers

Posted: Thu Jul 30, 2020 2:05 pm
by zedonet
I downloaded and installed Manjaro 20.0.3 today, this should be the current version.
hostnamectl shows "Kernel Linux 5.6.19-2-MANJARO" which is a different kernel version, however TurboPrint should not depend on the kernel version.

Before installation of TurboPrint, I had to install the GTK-2 libraries. Then installation went smoothly and TurboPrint Monitor was launched at printing without problems.

Did you download & install TurboPrint as .tgz archive from our website turboprint.info?

Re: TurboPrint 2.50 with new printer drivers

Posted: Thu Jul 30, 2020 2:37 pm
by EdoNork
Yes, downloaded from official site.
I just installed it over the previous version.

Re: TurboPrint 2.50 with new printer drivers

Posted: Mon Aug 03, 2020 3:18 pm
by EdoNork
It looks like removing TP completely and reinstalling it has solve the issue.
Now I have to recreate all my paper profiles an custom paper sizes.