Page 1 of 1

Test Ink Limits ET-7750 - Rear Feed

Posted: Thu Sep 03, 2020 1:58 pm
by goblindreams
Hi there,

I'm trying to set up a profile and test my ink limits, but using a paper that can only go in the rear feed. I can't seem to get it to print the test row using the rear feed.
I set it as rear feed in printer settings, but the test row want's to ptrint from the cassette.
any advice appreciated :)

Re: Test Ink Limits ET-7750 - Rear Feed

Posted: Wed Sep 09, 2020 1:42 pm
by zedonet
Hello,

when printing the ink limit test, always the default feed is used. We plan to add a selection in a future PrintFab version.
However, when printing the actual color profile, you can select the paper input in the dialog.

I recommend to keep the default setting (250) and to print the color profile chart. If there is too much ink on the chart (ink bleeds from one color patch to surrounding fields), you can create a new profile setting with a lower ink limit setting and print a new chart.