Canon PIXMA iP1700 & other new Canon drivers
Canon PIXMA iP1700 & other new Canon drivers
Will this printer be supported soon.
New Canon printers & multifunction devices
Drivers for new Canon printers are planned for early 2007.
Most new Canon printers can be used with existing drivers:
Canon iP4300 -> iP4200
Canon MP160 -> MP150
Canon MP180 -> MP170
Canon MP460 -> MP450
Canon MP510 -> MP500
Canon MP600 -> MP500
Canon MP810 -> MP800
Canon iP1200/1300/1700 -> iP2200
(this has not been tested extensively - not all print resolutions may work).
Most new Canon printers can be used with existing drivers:
Canon iP4300 -> iP4200
Canon MP160 -> MP150
Canon MP180 -> MP170
Canon MP460 -> MP450
Canon MP510 -> MP500
Canon MP600 -> MP500
Canon MP810 -> MP800
Canon iP1200/1300/1700 -> iP2200
(this has not been tested extensively - not all print resolutions may work).
Last edited by zedonet on Fri Dec 15, 2006 11:26 am, edited 1 time in total.
TurboPrint 1.95 with new printer drivers for Canon PIXMA iP90, iP1200, iP1300, iP1700, iP4300, MP160, MP180, MP460, MP510, MP600, MP600R, MP810, Epson Stylus Pro 4800, 7800, 9800 now available
http://www.turboprint.info
Canon PIXMA iP3300, iP6600D, iP6700D, iX4000, iX5000 will be added next.
http://www.turboprint.info
Canon PIXMA iP3300, iP6600D, iP6700D, iX4000, iX5000 will be added next.
On Ubuntu 6.10 with CUPS installed
I tried with iP2200 on 1.94 but printer light flashes as if receiving data but doesnt print anything. The job gets removed from queue.
Now i installed 1.95. Light flashes, draws in the paper and puts it out immediately without printing anything and job gets removed from queue
Any Idea?
I tried with iP2200 on 1.94 but printer light flashes as if receiving data but doesnt print anything. The job gets removed from queue.
Now i installed 1.95. Light flashes, draws in the paper and puts it out immediately without printing anything and job gets removed from queue
Any Idea?
I have got exactly the same problem with a Canon IP1200. The test page do exactly the same effect. I suppose that we can find any log somewhere, any idea where ?anoopjohn wrote:On Ubuntu 6.10 with CUPS installed
I tried with iP2200 on 1.94 but printer light flashes as if receiving data but doesnt print anything. The job gets removed from queue.
Now i installed 1.95. Light flashes, draws in the paper and puts it out immediately without printing anything and job gets removed from queue
Any Idea?
Thank you for your feedback and please excuse the problem!
The driver currently only works if
- both black and color cartridge are present in the printer
or
- a different "Paper" setting than "Plain paper" is chosen in TurboPrint Config / xtpconfig (e.g. "Inkjet Paper")
I will post when a corrected version is available.
The driver currently only works if
- both black and color cartridge are present in the printer
or
- a different "Paper" setting than "Plain paper" is chosen in TurboPrint Config / xtpconfig (e.g. "Inkjet Paper")
I will post when a corrected version is available.
Canon Pixma 1800
I have a new Canon Pixma 1800
I installed and started CUPS on my Gentoo system
I setup the printer within turboprint as a pixma 1700
Oct 9 19:22:20 [kernel] drivers/usb/class/usblp.c: usblp0: removed
Oct 9 19:31:13 [kernel] usb 4-1: new full speed USB device using ohci_hcd and address 4
Oct 9 19:31:13 [kernel] usb 4-1: configuration #1 chosen from 1 choice
Oct 9 19:31:13 [kernel] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10C2
the first time I added it in xptsetup, test page failed saying it couldn't talk to CUPS. I tried again and the test page printed fine.
I can't explain that one...
I installed and started CUPS on my Gentoo system
I setup the printer within turboprint as a pixma 1700
Oct 9 19:22:20 [kernel] drivers/usb/class/usblp.c: usblp0: removed
Oct 9 19:31:13 [kernel] usb 4-1: new full speed USB device using ohci_hcd and address 4
Oct 9 19:31:13 [kernel] usb 4-1: configuration #1 chosen from 1 choice
Oct 9 19:31:13 [kernel] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10C2
the first time I added it in xptsetup, test page failed saying it couldn't talk to CUPS. I tried again and the test page printed fine.
I can't explain that one...