Preview and Layout Editor

Post Reply
paquito
Posts: 2
Joined: Fri Jan 07, 2022 11:22 am

Preview and Layout Editor

Post by paquito »

Good morning,
I have problems with the print manager, after the installation and several days running well suddenly stops working or load the viewer or print editor, send directly to the printer without going through the manager.
Attached image of what does not start.
You can tell me where the mistake is.
Thank you.
Attachments
printfab_preview_monitor.png
printfab_preview_monitor.png (160.54 KiB) Viewed 2009 times
zedonet
Site Admin
Posts: 2156
Joined: Fri Oct 06, 2006 8:02 am

Re: Preview and Layout Editor

Post by zedonet »

Hello,

I understand that you can print with PrintFab, but the "Preview and Layout Editor" no longer appears - please write if you have a different problem.

Please check:

1) in the PrintFab driver settings, the checkbox "Print Preview / Layout Editor" must be set activated

2) in Windows task manager, tab "Autostart", the option "PrintFab Printjob monitor" must be activated
paquito
Posts: 2
Joined: Fri Jan 07, 2022 11:22 am

Re: Preview and Layout Editor

Post by paquito »

Hello,
Thank you very much was the second choice.
A greeting
Post Reply