I have tried Printfab these days. I tried to use the “Matte Inkget” setting, but the ink volume is still too wet even if it is limited to 100, which makes the color blocks blurry. I looked up some posts and modified the .tpr file, but even with a very low “DRange” setting, the deepest part of the two-color block (200%) and single-color block (100%) still has ink overflow. At the same time, the black mixed by CMY is too light, and the pigment black ink is difficult to adhere (after testing, the paper can only adhere to 30% of black ink without fading).
Is there any way I can print this kind of paper and get better results? At the same time, I hope to use black ink and manage the use of black ink (up to 30% of black ink can be used, which seems can be set in i1Profiler), rather than having Printfab add black ink.
This is my modified settings file and its printing effect (print settings: CMYKProof; No Correction; 5760dpi):
https://drive.google.com/drive/folders/18hRCkyhc912LJ71Yc9qzHv_qOcJZKq7M?usp=sharing
Code: Select all
[Printfab_Profile]
[Linearization]
Cartridge=0
Quality=5
Channels="k","c","m","y"
Linmode="Density"
Density_k=1,2,2,4,4,4,4,4,5,5,5,5,5,5,6,6,6,6,6,6,6,6,6,6,7,7,7,7,7,7,7,7
Density_c=1,2,3,4,7,7,8,8,9,10,10,11,11,12,12,12,12,12,13,13,14,14,14,14,14,14,14,15,15,15,15,15
Density_m=1,2,2,3,3,4,5,6,6,6,6,6,6,7,7,7,7,7,7,7,8,8,8,8,8,8,8,8,8,8,8,8
Density_y=6,7,8,9,10,12,12,13,14,14,14,14,14,14,14,14,15,15,15,15,15,15,16,16,16,17,17,17,17,17,17,17
[Color_Profile]
Name="TAKEO VENT NOUVEAU V"
Profilestate=0
File="TAKEO_VENT_NOUVEAU_V_1005"
Printer="Epson_L1300"
Config="tp1"
Paperclass="inkjet"
Ordernumber=""
User="111"
Email=""
Papername="VENT NOUVEAU V"
Manufacturer="TAKEO"
Inkname="T672"
Inkmanufacturer="Epson"
ICCfilename=""
ICCdescription=""
ICCcopyright=""
Creationdate="01-Nov-2023 16:32"
Linearizationdate=""
Numchannels=0
Mediacode=11
Cartridge=0
Quality=5
GDIQuality="Photo"
ProfileMaxInk=250
Profile3C=0
DatafileVersion=2
DefaultBrightInk=0
DefaultBlackStart=70
DefaultBlackAdd=10
Channels="k","c","m","y"
Format=2
DefaultMaxInk=250
DRange_k=1,7
DRange_c=1,15
DRange_m=1,8
DRange_y=6,17