Problem with custom paper icc profiles
Posted: Wed May 01, 2013 6:37 pm
Hi there,
I recently run into an odd problem with custom icc profiles. I've used these quite happily for several years, and all was fine. After a recent hardware upgrade I had to reinstall TP and re-import my icc profiles for my print media.
Ever since, saturation levels of the prints are way to light. I initially suspected the printer, or problems with the color space setup. However prints on the standard media are just fine. I'd appreciate any hints how to get to the bottom of this.
FYI: Current TP version is 2.25, used on OpenSuse 12.3 (64bit). Previously used successfully on 12.2. I print on a HP Photosmart Pro 9180. Images are printed directly from Aftershotpro, using Kodaks Pro RGB colorspace. The icc profiles where measured by Zedonet.
I've deleted and re-imported the profile in question, but to no avail.
Thanks
Uli Wortmann
I recently run into an odd problem with custom icc profiles. I've used these quite happily for several years, and all was fine. After a recent hardware upgrade I had to reinstall TP and re-import my icc profiles for my print media.
Ever since, saturation levels of the prints are way to light. I initially suspected the printer, or problems with the color space setup. However prints on the standard media are just fine. I'd appreciate any hints how to get to the bottom of this.
FYI: Current TP version is 2.25, used on OpenSuse 12.3 (64bit). Previously used successfully on 12.2. I print on a HP Photosmart Pro 9180. Images are printed directly from Aftershotpro, using Kodaks Pro RGB colorspace. The icc profiles where measured by Zedonet.
I've deleted and re-imported the profile in question, but to no avail.
Thanks
Uli Wortmann