Page 1 of 1

"Clean Print Heads" & "Show ink Status&q

Posted: Thu Apr 05, 2007 7:10 am
by shefi
ToolBox "Clean Print Heads" & "Show ink Status"
On my G5Dual2ghz with Dlink DI-524UP + Canon Pixma ip1500 it does not work.
(printfab 2.0.5)
Any idea why?

I need to disconnect the usb cable and connect it directly to the Mac if I need to do some maintenece.

I bought the PrintFab (and the DI-524UP) to avoid manually reconnecting the printer each time....

This one should be fixed![/img]

Posted: Thu Apr 05, 2007 10:54 am
by zedonet
Hello,

"show ink status" will only work for local connection (bidirectional communication not supported with most network protocols & printer servers).

All other maintenance tasks work also for network printers, so "clean print heads" should work. Does "nozzle check test page" work?

"nozzle check test page" is working!

Posted: Thu Apr 05, 2007 11:29 am
by shefi
YES ! I checked again and now "nozzle check test page" is working under network connection.