unablke to print to CD

Linux distribution specific questions
Post Reply
rasman
Posts: 24
Joined: Mon Oct 13, 2008 8:51 am

unablke to print to CD

Post by rasman »

Just upgraded to turboprint 2.30-1 and Ubuntu Precise from Lucid. Laptop also changed from 32-bit to a 64-bit machine.

When I try to print a CD that I've printed before it not longer wotrks. Turboprint complains that the CD tray is open or missing.
My printer is a Canon PIXMA 9000 pro.

These are the sttings I'm using:

page size 14x14 with a 1cm margin (also tried 14.1 x 14 as was recommended to get around some openoffice issue in the past - don't know whether that's still required).
from the print menu:
Paper size CD/DVD, orientation landscape, CD Tray, Duplex Off.
Device settings specify CD Printable media.

When I print I see briefly a message from turboprint monitor that it's attempting to feed paper then the message about the CD Tray being open.

Yet the print job characteristics appearing in Monitor say Feed Tray=CD

The other change that's occurred since upgrading to Precise is the t now come with LibreOffice instead of OpenOffice, but I'd be surprised if that's a factor since it appears that Turboprint is being told to print a CD from the CD tray.

Here's the print log:

Code: Select all

----------- Start of print job -----------
starting child process
tpprint 2.30-1 x64 (10-MAY-2013) - TurboPrint printer driver
Copyright (C)ZEDOnet GmbH, Irsee, Germany. All rights reserved.
01-Sep-2013 14:09
PPD file: /etc/cups/ppd/Pro9000-TurboPrint.ppd
header file: /tmp/pstoturboprint12043.chunk
GPL Ghostscript Zedo2 9.05 (2012-02-08)
Copyright (C) 2010 Artifex Software, Inc.  All rights reserved.
This software comes withSearching PPD file and postscript header for options...
 NO WARRANTY: see the file PUBLIC for details.
page size Custom1000 overwritten by ---media=Custom1000
duplex overwritten by ---Duplex=None
interpret_ps: no output file specified
::set_info_paths: setting preview file to /var/spool/turboprint/richardm/zmf/26.zmf
GPL Ghostscript Zedo2 9.05 (2012-02-08)
Copyright (C) 2010 Artifex Software, Inc.  All rights reserved.
This software comes with NO WARRANTY: see the file PUBLIC for details.
Processing pages 1 through 1.
Processing pages 1 through 1.
Page 1
Page 1
Filetype=PBM Plusbits_per_pixel=32 bytes_per_line=13228  width=3307 height=3307
RGB mode 8bit
Custom user pagesize id=1000
width=5512 height=5512
minmargins left=134 right=134 top=118 bottom=275
margins left=394 right=394 top=394 bottom=394
offset left=0 right=0 scale x=10000 y=10000
size corrected to 6772 10827
offset corrected for CD printing to left=-78 top=-78
margins corrected to l,r,t,b=992,1134,4492,1689
cdmask 1575,4646
print_file: tp_init->preview=2
print_file: preview with pause - wait for user confirmation
set_image width=1019 height=1019
print_page: preview dialog returned 1
Printer=Canon_PIXMA_Pro9500; Module=Canon; Id=Pro9500
Colormode=2; Cartridge=0=Photo; Quality=0=Medium; Paper=9=CD printable
Pagesize=1000=CD/DVD; Paper Input=2=CD Tray; Paper Output=0=Front
Duplex=0=Off; Copies=1; Mirror=0; Dithering=0; Flip=0
Page x=3302 y=5412; AppDpi x=600 y=600; DitDpi x=600 y=600; 
PrnDpi x=600 y=600; Overlay=0

tpfile::get_patchsample_table: paper=CD printable verbatim matte photo
patches; linmode=density
table::build_gamma_table: i=0 color=4 gamma=100 max=100 saturation=53
gamma 100 max 100 saturation 53 for channel 0
correction=32767
table::build_gamma_table: i=1 color=5 gamma=100 max=100 saturation=53
gamma 100 max 100 saturation 53 for channel 1
correction=33491
table::build_gamma_table: i=2 color=6 gamma=100 max=100 saturation=70
gamma 100 max 100 saturation 70 for channel 2
correction=32427
table::build_gamma_table: i=3 color=7 gamma=100 max=100 saturation=53
gamma 100 max 100 saturation 53 for channel 3
correction=31856
table::build_gamma_table: i=4 color=8 gamma=100 max=100 saturation=53
gamma 100 max 100 saturation 53 for channel 4
correction=31692
table::build_gamma_table: i=5 color=9 gamma=100 max=100 saturation=53
gamma 100 max 100 saturation 53 for channel 5
correction=31107
table::build_gamma_table: i=6 color=12 gamma=100 max=100 saturation=53
gamma 100 max 100 saturation 53 for channel 6
correction=31206
table::build_gamma_table: i=7 color=0 gamma=100 max=100 saturation=70
gamma 100 max 100 saturation 70 for channel 7
correction=31893
table::build_gamma_table: i=8 color=1 gamma=100 max=100 saturation=70
gamma 100 max 100 saturation 70 for channel 8
correction=32248
cmm::generate_memory_profile: multi3c_k_grey=3 lin_mode set to density
shadow: 0 => adjust 100 min 50/10 max 50; grey: a=0 b=0; colorspace=APPLE; cmykspace=0; intent=perceptual; daylight = 6500K
cmm::generate_memory_profile: multichannel_mode=TRUE (KCMYcmg)
cmm::generate_memory_profile: multi3c_mode=TRUE
multi_profile_switch=100 multi_c2_switch=100 multi_m2_switch=100
ucr_up=179; max_ink=510; ucr_add=64
polyfit mode=2 channels=3 terms=52 patches=1
support::matrix_invert: matrix not invertible
support::matrix_invert: matrix not invertible
support::matrix_invert: matrix not invertible
polyfit mode=4 channels=3 terms=40 patches=125
bright_cyan_fac=156  bright_magenta_fac=254 
black_fac=100 cyan_fac=78  magenta_fac=81 yellow_fac=59
init_cmyk2multichannel: c2fac=156 m2fac=254 kfac=100 k2fac=0 k3fac=195 multi_max_ink=512
printer white:l=898 a+000 b+045
printer white poly:l=898 a+000 b+045
printer black poly:l=261 a+009 b+022
printer darkest poly:l=261 a+009 b+022
black   l=00 a+00 b+00 => l=264 a+007 b-017: K87 C39 M34 Y00 c00 m00 k00 g00
black94 l=06 a+00 b+00 => l=299 a+003 b-014: K70 C44 M25 Y17 c00 m00 k00 g00
black87 l=17 a+00 b+00 => l=344 a+003 b-010: K55 C35 M18 Y18 c03 m03 k00 g07
black75 l=34 a+00 b+00 => l=444 a+002 b-003: K17 C08 M03 Y10 c20 m19 k00 g52
black62 l=48 a+00 b+00 => l=537 a+001 b+000: K00 C00 M00 Y07 c22 m20 k00 g60
black50 l=60 a+00 b+00 => l=619 a+003 b+003: K00 C00 M00 Y05 c17 m17 k00 g39
black37 l=71 a+00 b+00 => l=695 a+001 b+009: K00 C00 M00 Y04 c12 m10 k00 g26
black25 l=82 a+00 b+00 => l=766 a+000 b+013: K00 C00 M00 Y03 c08 m07 k00 g15
black12 l=91 a+00 b+00 => l=834 a+000 b+016: K00 C00 M00 Y02 c07 m05 k00 g05
white   l=99 a+00 b+00 => l=894 a-007 b+036: K00 C00 M00 Y00 c01 m00 k00 g00
cyan    l=89 a-54 b-17 => l=763 a-177 b-180: K00 C00 M00 Y00 c54 m00 k00 g00
magenta l=64 a+87 b-52 => l=627 a+485 b-150: K00 C00 M18 Y00 c00 m82 k00 g00
yellow  l=97 a-14 b+86 => l=870 a-090 b+650: K00 C00 M00 Y71 c00 m00 k00 g00
red     l=58 a+77 b+70 => l=564 a+473 b+415: K00 C00 M30 Y89 c00 m52 k00 g00
green   l=86 a-84 b+72 => l=722 a-391 b+453: K00 C04 M00 Y83 c40 m00 k00 g00
blue    l=32 a+60 b-105 => l=441 a+139 b-409: K00 C58 M25 Y00 c33 m66 k00 g00
canon::setup_printer_info: number of channels: 9
canon_info.model_level=4
canon::setup_printer_info: multi raster mode
canon::setup_printer_info: bits per pixel: 4
canon::setup_printer_info: multiraster package size=16
canon::setup_printer_info: i9950/iP100 mode
Canon init string: esc(c 30 c 2 esc(J 10 
 esc(t 80 90 4 esc(l 3a 12
 esc(p 272 0 186 0

Colormatch file=PGI9photo; Curves=2400dpi_pro9500; Table=cd_matte
Report at end of pdrive_class::begin_page
Total memory usage=6815824
PREVIEW y_offset=2695 org_height=6496 src_scanline=70 preview_scanline=6
calculate_dim: print left=0 top=0 width=2787 height=2787
calculate_dim: section left=260 top=260 width=2787 height=2787
check_add_logo returned 0
Printed section of picture:
  left=260 top=260 width=2787 height=2787 
Printer: resolution x_dpi=600 y_dpi=600 color_mode=2
Page - printable area in printer pixels:
  left=595 top=2695 width=2787 height=2787
Print size in printer pixels, relative to printable area:
  left=0 top=0 width=2787 height=2787


Any thoughts on what's wrong?

Richard
zedonet
Site Admin
Posts: 2156
Joined: Fri Oct 06, 2006 8:02 am

Re: unablke to print to CD

Post by zedonet »

Hello,

everything looks fine in the log file, except that the driver "Canon PIXMA Pro9500" is shown instead of your Canon PIXMA Pro9000 printer. Please make sure that the correct driver is selected in TurboPrint Control - if necessary remove the printer entry and add it again with the correct driver.
rasman
Posts: 24
Joined: Mon Oct 13, 2008 8:51 am

Re: unablke to print to CD

Post by rasman »

thanks, that suggestion got the cd tray to be recognised. But Libreoffice Draw get's the CD template completely wring. It's as openoffice was a few yeasrs ago when the template had to be embedded in A4. Printing using openoffice works.

Richard
Post Reply