Upgrade to 7.04 Ubuntu

madsurfer · Post by **madsurfer** » Thu Jun 21, 2007 9:43 pm

Hi

I have 2 Ubuntu network PC's that both local(usb) and remote(cups) machine where at 6.10 version. Turboprint worked fine on these 2 machines and I could print from my remote to my local machine using the cups printing, however I upgraded my remote machine to 7.04 Ubuntu reinstalled Tuboprint on this machine and tried to print. This did not work even though I was using the same xtpsetup as before on my local machine. The print from my remote machine shows that it has printed however the local machine shows no prints. There is no error shown on my remote machine. How can I get this to work?

Adrianjavascript:emoticon(':?')

madsurfer · Post by **madsurfer** » Wed Jun 27, 2007 9:26 am

Hi

I still have this problem, does anyone know how to fix it?

Adrian

madsurfer · Post by **madsurfer** » Fri Jun 29, 2007 3:51 pm

Is anyone reading this? I have had no replies, does anyone know how to investigate fix this?

Have checked the error logs and there is nothing obvious?

help

Post by **zedonet** » Mon Jul 02, 2007 1:36 pm

Hello,

there seems to be a problem with USB devices on some installations of Ubuntu Feisty, see e.g.

http://www.turboprint.info/support/view ... ?p=454#454

However, we have not yet been able to reproduce the problem on our computers and still have no explanation / solution.

You may send the log files /var/log/turboprint_cups.log and /var/log/cups/error_log after trying to print (post only the section for the last print).

Post by **zedonet** » Thu Jul 05, 2007 8:40 am

Another post from our support forum http://www.turboprint.info/support/view ... ?p=510#510

Please let me know if this helps:

Found the problem!

Probably one of the Ubuntu updates changed the pÃ¨rmissions of /dev/usblp0.
It had group owner scanner and it should be lp. Changed it back and the MP530 is back working!

madsurfer · Post by **madsurfer** » Fri Jul 06, 2007 11:37 am

Hi
Which computer do I look on the server or the local machine?

Post by **zedonet** » Mon Jul 09, 2007 9:32 am

If there are USB problems, look on the computer the printer is attached to.

madsurfer · Post by **madsurfer** » Fri Jul 20, 2007 11:00 am

I have been away so I have not been around to look at this, so today I did have a look the permissions for the /dev/usblp0 are OK so I think this alright, what can I look at next, this printing problem is getting more important.

Adrian
.