Vertical lines in prints
Posted: Sun Mar 05, 2017 6:29 pm
I've been using TP for several months and I just realized that my prints contain a series of vertical lines made up of dots that reflect light, roughly every 2 cm, a single line alternating with a double line. These are only visible with light coming at a steep angle from above.
I have tried setting ink limit to 240% instead of 300%, that did not help.
With Epson P800 on Canson Baryta Photographique, using zedonet profile.
Any possible explanation or suggestion to correct this?
See example here:
https://www.dropbox.com/s/apk8qjaaevwzg ... s.jpg?dl=0
(due to the difficulty of photographing this problem, lines in the above are only visible in the middle but as a matter of fact they do range throughout the whole width of the picture).
I have tried setting ink limit to 240% instead of 300%, that did not help.
With Epson P800 on Canson Baryta Photographique, using zedonet profile.
Any possible explanation or suggestion to correct this?
See example here:
https://www.dropbox.com/s/apk8qjaaevwzg ... s.jpg?dl=0
(due to the difficulty of photographing this problem, lines in the above are only visible in the middle but as a matter of fact they do range throughout the whole width of the picture).