The following is the turboprint_cups.log when I tried to print from Open Office on Ubuntu 7.10. Nothing printed. The only message from Ubuntu was "The printer may not be connected" which pops up after a delay.
Test print under turboprint won't work either. I haven't been able to get turboprint to work at all after re-installing multiple times. The Canon Multipass F-30 is connected to a WinXP machine on the network. I have installed the printer add-on in WinXP. The Ubuntu machine gets its DHCP address from a Linksys Router behind a linux machine running Smoothwall. The WinXP machine (with printer) gets its DHCP address from the same router.
#######################################################
NEW PRINT JOB Fri Apr 11 17:26:29 EDT 2008 (pstoturboprint 1.96-3)
job-id 105
user sjay
title Untitled1
copies 1
options InputSlot=AutomaticFeed PageSize=Letter job-uuid=urn:uuid:52397c13-945b-3092-4c6c-ea295a248cd0
file
test directory access:
drwxr-xr-x 2 sjay sjay 36864 Apr 10 22:38 /usr/share/turboprint/printers
linux-gate.so.1 => (0xffffe000)
libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0xb7f26000)
libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb7ddc000)
/lib/ld-linux.so.2 (0xb7f5f000)
/usr/bin/tpprint -v2 -l/var/log/turboprint_cups.log --ppdfile=/etc/cups/ppd/tp0.ppd --psfeatures /tmp/pstoturboprint26892.chunk /tmp/pstoturboprint26892.var
Searching PPD file and postscript header for options...
check_flag_file: opening /var/log/turboprint/prv/tp0
check_flag_file: opening /var/log/turboprint/sml/tp0
----------- Start of var file -----------
ZEDOPARM="$ZEDOPARM zedoPageRegion=Letter"
ZEDOPARM="$ZEDOPARM zedoMediaType=Plainpaper_0"
ZEDOPARM="$ZEDOPARM zedoInputSlot=AutomaticFeed"
ZEDOPARM="$ZEDOPARM zedoColorModel=RGB"
ZEDOPARM="$ZEDOPARM zedoDithering=ErrorDiffusion"
ZEDOPARM="$ZEDOPARM zedoMirror=0"
ZEDOPARM="$ZEDOPARM zedoDuplexAdjust=0"
ZEDOPARM="$ZEDOPARM zedoIntensity=0"
ZEDOPARM="$ZEDOPARM zedoBrightness=0"
ZEDOPARM="$ZEDOPARM zedoContrast=0"
ZEDOPARM="$ZEDOPARM zedoColorCorrection=1"
ZEDOPARM="$ZEDOPARM zedoUserColor=0"
ZEDOPARM="$ZEDOPARM zedoGamma=180"
ZEDOPARM="$ZEDOPARM zedoColorY=0"
ZEDOPARM="$ZEDOPARM zedoColorM=0"
ZEDOPARM="$ZEDOPARM zedoColorC=0"
ZEDOPARM="$ZEDOPARM zedoColorK=0"
ZEDOPARM="$ZEDOPARM zedoGamut=0"
ZEDOPARM="$ZEDOPARM zedoResolution=600x600dpi"
ZEDOPARM="$ZEDOPARM zedoPrinterDriver=Canon_Multipass_F30"
GSPPDFOUND=1
GSCOLORMODE=2
GSXDPI=600
GSYDPI=600
GSWIDTH=5100
GSHEIGHT=6600
TPWIDTH=8500
TPHEIGHT=11000
TPXOFFSET=0
TPYOFFSET=0
DUPLEX=0
PREVIEW=0
NOPRINT=0
PVXDPI=11
PVYDPI=11
PVWIDTH=96
PVHEIGHT=125
----------- End of var file -----------
GSCOMMANDLINE=gs -sDEVICE=pcx24b -r600x600 -g5100x6600 -dSAFER -dNOPAUSE -dBATCH
TPCOMMANDLINE=/usr/bin/tpprint -a0 -e1 -s8500x11000 -p0x0 -v2 -l/var/log/turboprint_cups.log --ppdfile=/etc/cups/ppd/tp0.ppd --psheader=/tmp/pstoturboprint26892.chunk --jobid=105 --username='sjay'
COMPLETEPIPE=/usr/share/turboprint/lib/tpstdin --paste /tmp/pstoturboprint26892.chunk | gs -sDEVICE=pcx24b -r600x600 -g5100x6600 -dSAFER -dNOPAUSE -dBATCH -sOutputFile=/tmp/pstoturboprint26892.fifo - >> /var/log/turboprint_cups.log
----------- Start of print job -----------
GPL Ghostscript SVN PRE-RELEASE 8.61 (2007-08-02)
Copyright (C) 2007 Artifex Software, Inc. All rights reserved.
This software comes with NO WARRANTY: see the file PUBLIC for details.
Loading NimbusRomNo9L-Regu font from /var/lib/defoma/gs.d/dirs/fonts/n021003l.pfb... 2891380 1382828 3395968 1810489 1 done.
starting child process
tpprint 1.96-4 (11-JAN-2008) - TurboPrint printer driver
Copyright (C)ZEDOnet GmbH, Irsee, Germany. All rights reserved.
Searching PPD file and postscript header for options...
interpret_ps: no output file specified
PCX compression 1
Filetype=PCXbits_per_pixel=32 bytes_per_line=20400 width=5100 height=6600
RGB Mode
Printer=Canon_Multipass_F30; Module=Canon; Id=S600
Colormode=2; Cartridge=0=Color; Quality=1=Medium; Paper=0=Plain paper
Pagesize=1=US-Letter; Paper Input=0=Automatic Feed; Paper Output=0=Front
Duplex=0=Off; Copies=1; Mirror=0; Dithering=0; Flip=0
Page x=4800 y=6360; AppDpi x=600 y=600; DitDpi x=600 y=600;
PrnDpi x=600 y=600; Overlay=0
table; linmode=gamma
table::build_gamma_table: i=0 color=4 gamma=272 max=100 saturation=90
gamma 272 max 100 saturation 90 for channel 0
correction=32767
table::build_gamma_table: i=1 color=5 gamma=272 max=100 saturation=90
gamma 272 max 100 saturation 90 for channel 1
correction=32767
table::build_gamma_table: i=2 color=6 gamma=272 max=100 saturation=90
gamma 272 max 100 saturation 90 for channel 2
correction=32767
table::build_gamma_table: i=3 color=7 gamma=272 max=100 saturation=90
gamma 272 max 100 saturation 90 for channel 3
correction=32767
cmm::generate_memory_profile: multi3c_k_grey=65535
grey: a=0 b=0; colorspace=APPLE; cmykspace=0; intent=perceptual; daylight = 6500K
cmm::generate_memory_profile: multi3c_mode=TRUE
multi_profile_switch=150 multi_c2_switch=100 multi_m2_switch=100
black l=00 a+00 b+00 => l=000 a+000 b+000: K99 C00 M00 Y00 c00 m00 k00 g00
black94 l=06 a+00 b+00 => l=000 a+000 b+000: K96 C21 M12 Y10 c00 m00 k00 g00
black87 l=17 a+00 b+00 => l=000 a+000 b+000: K77 C52 M44 Y37 c00 m00 k00 g00
black75 l=34 a+00 b+00 => l=000 a+000 b+000: K20 C71 M72 Y72 c00 m00 k00 g00
black62 l=48 a+00 b+00 => l=000 a+000 b+000: K09 C54 M55 Y55 c00 m00 k00 g00
black50 l=60 a+00 b+00 => l=000 a+000 b+000: K00 C38 M39 Y39 c00 m00 k00 g00
black37 l=71 a+00 b+00 => l=000 a+000 b+000: K00 C27 M28 Y29 c00 m00 k00 g00
black25 l=82 a+00 b+00 => l=000 a+000 b+000: K00 C17 M18 Y20 c00 m00 k00 g00
black12 l=91 a+00 b+00 => l=000 a+000 b+000: K00 C08 M08 Y09 c00 m00 k00 g00
white l=99 a+00 b+00 => l=000 a+000 b+000: K00 C00 M00 Y00 c00 m00 k00 g00
cyan l=89 a-54 b-17 => l=000 a+000 b+000: K00 C51 M00 Y00 c00 m00 k00 g00
magenta l=64 a+87 b-52 => l=000 a+000 b+000: K00 C00 M92 Y01 c00 m00 k00 g00
yellow l=97 a-14 b+86 => l=000 a+000 b+000: K00 C00 M00 Y79 c00 m00 k00 g00
red l=58 a+77 b+70 => l=000 a+000 b+000: K00 C00 M87 Y98 c00 m00 k00 g00
green l=86 a-84 b+72 => l=000 a+000 b+000: K00 C47 M00 Y66 c00 m00 k00 g00
blue l=32 a+60 b-105 => l=000 a+000 b+000: K00 C70 M46 Y00 c00 m00 k00 g00
canon::setup_printer_info: number of channels: 4
canon_info.model_level=1
canon::setup_printer_info: bits per pixel: 2
canon::setup_printer_info: S600/800 mode
Canon init string: esc(c 30 0 1
esc(t 80 80 1 esc(l 34 0
esc(p 27c 0 1e0 7
Colormatch file=S600; Curves=600dpi_quick; Table=plain_paper
Report at end of pdrive_class::begin_page
Total memory usage=725843
calculate_dim: print left=0 top=0 width=4800 height=6360
calculate_dim: section left=150 top=120 width=4800 height=6360
Print size in printer pixels, relative to printable area:
left=0 top=0 width=4800 height=6360
Time for <Profile> = 50
Time for <Color> = 550
Time for <Dither> = 270
Time for <Print> = 0
Time for <Total> = 1660
Line counters: skip=0; bitmap=0; others=6360; 8bit=0; white=5461; b/w=314
Color 0 sum: 2
Color 1 sum: 2
Color 2 sum: 1
Color 3 sum: 2
total sum: 7
pixmap_class::open: end of file reached
print_page: end of input file
Report at end of pdrivecontrol_class::release_printer
Total memory usage=0
child process terminated
------------ End of print job - result = 0 ------------
job cancelling procedure - TPPID=27021 GSPID=27023
------------ END of tpprint filter ------------
Canon F30 Won't print
Hello,
the log file is okay so there must be a problem with sending the print data over the network.
You can look into /var/log/cups/error_log.
You can also debug printing to Windows from command line:
E.g.
echo "hello" | smbclient //server/printer -c "print -"
will send the text "hello" to the printer "printer" on server "server" (change "server" and "printer" to the server name and printer share name on your network).
The printer will not print but you should see if the connection works (e.g. hold the print queue on XP and check if a print job appears.
If this works, printing should also work via Turboprint - in TurboPrint Setup, choose "Remote Windows" as connection, enter the "server" name and the "printer" name and "guest" as "user name".
the log file is okay so there must be a problem with sending the print data over the network.
You can look into /var/log/cups/error_log.
You can also debug printing to Windows from command line:
E.g.
echo "hello" | smbclient //server/printer -c "print -"
will send the text "hello" to the printer "printer" on server "server" (change "server" and "printer" to the server name and printer share name on your network).
The printer will not print but you should see if the connection works (e.g. hold the print queue on XP and check if a print job appears.
If this works, printing should also work via Turboprint - in TurboPrint Setup, choose "Remote Windows" as connection, enter the "server" name and the "printer" name and "guest" as "user name".
Thanks. Got it to work. Tried sending echo as you suggested and saw some life so investigated error log further and found certificate error. Added cupsys as user, Changed alphabetical server address to numerical IP address and it now works.