Dear Friends,
I have the print server âD-Link DP-301P+ â with the parallel port printer âCanon BJC-4650â and I use Mandriva 2006.0 as operating system.
I have been trying to configure my printer without succes. Firstly I use the print configuration program âPrintdrakeâ with diferents drivers:
BJC-4400 photo: CUPS + Gutenprint r5.0.0-rc1 (en)
CUPS URI: beh_/1/0/30/socket://PS-B48E0B.lan:9100
That works fine but without colors!
BJC-4400: Ghostscript + gutenprint-ijs.5.0
CUPS URI: beh_/1/0/30/socket://PS-B48E0B.lan:9100
That works fine but without colors!
BJC-4650: Ghostscript + bjc800
CUPS URI: beh_/1/0/30/socket://PS-B48E0B.lan:9100
It doesn't work at all. But it works fine even with colors using the parallel port cable.
Finally I try with the Turboprint Free Edition 1.92-2 without any result! (only works using the parallel port cable).
I have runned âxtpsetupâ and I have configured my printer as follows:
BJC-4650: Canon_BJC4650 TurboPrint
CUPS URI: socket://192.168.1.3:9100
Short name: tp0
Config Name: Canon_BJC4650
Connection: Socket
Sever Name: 192.168.1.3 (or PS-B48E0B)
Socket: 9100
And if I try to make a Testpage:
First time:
Processing page 1...
Next times if I cancel and try again:
Processing page 1...
Network host '192.168.1.3 is busy; will retry in 10 seconds
Network host '192.168.1.3 is busy; will retry in 15 seconds
(...)
Can you help me?
Thanks you very much
Canon BJC-4650 with D-link DP-301P+
Hello,
if you can print to your printserver with gutenprint it should also work with TurboPrint using the same CUPS URI
beh_/1/0/30/socket://PS-B48E0B.lan:9100
or
socket://PS-B48E0B.lan:9100
You can also try
Connection: Network printer
Server: PS-B48E0B.lan
Printer: lp0
Please also look into /var/log/turboprint_cups.log for errors (or post the last section of this file if in doubt).
if you can print to your printserver with gutenprint it should also work with TurboPrint using the same CUPS URI
beh_/1/0/30/socket://PS-B48E0B.lan:9100
or
socket://PS-B48E0B.lan:9100
You can also try
Connection: Network printer
Server: PS-B48E0B.lan
Printer: lp0
Please also look into /var/log/turboprint_cups.log for errors (or post the last section of this file if in doubt).