Page 1 of 1
HP DesignJet 70
Posted: Fri Apr 10, 2009 11:50 am
by jumpa
Hi,
I'm trying Turboprint before I buy it.
I have a problem with HP Designjet 70 and Ubuntu Server 8.10.
I've installed the printer but if I try to print the test page, the printer is automatically switched off and then on, giving an error. On the turboprint control panel I have the message: "no connection to turboprint daemon".
Could you help me, please?
Thanks in advance
Jumpa
Posted: Tue Apr 14, 2009 9:09 am
by zedonet
Hello jumpa,
please check if your printer has the latest firmware - HP offers firmware updates on their webpage.
Regarding the turboprint daemon - it should be started automatically when booting your system. However, you can try to start it manually by entering the following command in a shell window:
sudo tprintdaemon
(you are asked for your password as the daemon need superuser rights to access the different printer ports).
Posted: Tue Apr 14, 2009 3:42 pm
by jumpa
Hi,
I've upgraded the firmware to the latest version, but I'm still experiencing the same problem:
as soon as I print a page, the printer automatically switch off and on, giving the error code 79:04. I've checked the HP site:
79:04 error code Explanation
An unexpected generic firmware error has occurred (unexpected ).
Recommended action
*
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check to see if the error code has disappeared.
*
Remove switchboxes and connect the printer directly to the computer via USB or Parallel cables.
*
If the error code reappears, upgrade the printer's firmware. Click here for information on how to upgrade the printer's firmware.
Any suggestions?
Thank you
PS: The printer works fine on a MS Windows Machine
Posted: Mon Apr 20, 2009 8:50 am
by jumpa
Now the printer differently behaves: I can spool abotu 27% of the test page, then it stops and give me back the error code 79:04.
I've tried also to connect the printer via LPT1, not using USB, but I stll have the same error.
Posted: Mon Apr 20, 2009 4:05 pm
by zedonet
Hello,
we investigated this problem a little further and found that a combination of certain printer commands may result in the HP Designjet 70 printer switching off. We will change that in the next TurboPrint release (within the next weeks).
Posted: Mon Apr 20, 2009 10:23 pm
by jumpa
Thank you,
I'll be waiting for incoming good news!
Bye