I am installing Turboprint 2.12 on Kubuntu 9.10 with a HP PhotoSmart1215 printer on a USB connection.
Cannot find printer under 'standard' or USB but managed to get the correct (I think) UIR anyway. Printer applet sets up 'new printer'.
URI: usb://HP/HP_PhotoSmart1215 (shown in System Settings)
Alternative URI: hp:/usb/photosmart_1215?serial=MY0BS141FPOS (also not working, same error message)
No pages are ever printed. Only sent to printer where they stay waiting for a miracle.
Error message from Turboprint Monitor:
"No connection to turboprint daemon."
How do I fix this, please?
No connection to turboprint daemon
Hello,
1. correct printer URI:
Normally, the port should be listed in TurboPrint Control Center when you add the printer - choose the entry "HP PhotoSmart ... - TP-USB".
If not, you can find the correct URI by entering the following command line in a Terminal window:
sudo /usr/lib/cups/backend/tpu
or for the usb backend
sudo /usr/lib/cups/backend/usb
Then enter the output, e.g. "tpu://HP/PhotoSmart1215" in TurboPrint Control Center - choose "Add" and "Choose port"="other".
2. "no connection to turboüprint daemon"
The daemon is important for TurboPrint Monitor - printing also works without the daemon. It should be started at boot time (you can try to reboot). You can also start it manually with the command
sudo tprintdaemon
(if an error message is reported, please post the message)
1. correct printer URI:
Normally, the port should be listed in TurboPrint Control Center when you add the printer - choose the entry "HP PhotoSmart ... - TP-USB".
If not, you can find the correct URI by entering the following command line in a Terminal window:
sudo /usr/lib/cups/backend/tpu
or for the usb backend
sudo /usr/lib/cups/backend/usb
Then enter the output, e.g. "tpu://HP/PhotoSmart1215" in TurboPrint Control Center - choose "Add" and "Choose port"="other".
2. "no connection to turboüprint daemon"
The daemon is important for TurboPrint Monitor - printing also works without the daemon. It should be started at boot time (you can try to reboot). You can also start it manually with the command
sudo tprintdaemon
(if an error message is reported, please post the message)
Zu 1:
I made it work using Cups only. Thank you for the asiistance. I will use it when I switch back to Turboprint.
Zu 2: Error message:
peter@peter-desktop:~$ sudo tprintdaemon
sudo: tprintdaemon: command not found
I made it work using Cups only. Thank you for the asiistance. I will use it when I switch back to Turboprint.
Zu 2: Error message:
peter@peter-desktop:~$ sudo tprintdaemon
sudo: tprintdaemon: command not found
zedonet wrote:Hello,
1. correct printer URI:
2. "no connection to turboüprint daemon"
sudo tprintdaemon
(if an error message is reported, please post the message)
[quote="pjj"]Zu 1:
I made it work using Cups only. Thank you for the assistance. I will use it when I switch back to Turboprint.
Zu 2: Error message:
peter@peter-desktop:~$ sudo tprintdaemon
sudo: tprintdaemon: command not found
I spoke hastily!
Now it works also with Turboprint.
The commands under 2: require a 'sudo' in order to work and produce output.
Thanks again.
I made it work using Cups only. Thank you for the assistance. I will use it when I switch back to Turboprint.
Zu 2: Error message:
peter@peter-desktop:~$ sudo tprintdaemon
sudo: tprintdaemon: command not found
I spoke hastily!
Now it works also with Turboprint.
The commands under 2: require a 'sudo' in order to work and produce output.
Thanks again.