Hello,
I have a Canon Pixma Pro 10s, with Turboprint.
There is something weird, because the driver complains that the printer is not connected, and shows a USB cable.
However, the printer works from the web manager, answers pings correctly.
It's like if the driver is looking for the USB cable, ignoring that the printer is network connected.
Any ideas?
thanks,
-Gian
printer not connected
Re: printer not connected
ok, I have clue...
in /var/log/turboprint/print.log I see...
device for Pro10S-TurboPrint: bjnp://192.168.x.yyy:8611
but the current address is 192.168.x.zzz so this is the problem.
Where is written the printer address, so I can fix the problem?
thanks,
-Gian
in /var/log/turboprint/print.log I see...
device for Pro10S-TurboPrint: bjnp://192.168.x.yyy:8611
but the current address is 192.168.x.zzz so this is the problem.
Where is written the printer address, so I can fix the problem?
thanks,
-Gian
Re: printer not connected
Hallo Gian,
you can edit the IP address in TurboPrint Control. There click on the button to edit your printer. You may either edit the URI string that defines the connection of the printer or select your printer in the pulldown list of printer connections currently available (attached printers which are detected automatically).
you can edit the IP address in TurboPrint Control. There click on the button to edit your printer. You may either edit the URI string that defines the connection of the printer or select your printer in the pulldown list of printer connections currently available (attached printers which are detected automatically).
Re: printer not connected
thanks!
Printer back in business... <g>
Printer back in business... <g>
Re: printer not connected
follow up..
I had a problem with the IP address (probably I reboot the printer and DHCP gave it a different address), which is now solved.
The printer works, is printing, BUT.. still shows "printer not connected" and the ink bars are all blank...
I had a problem with the IP address (probably I reboot the printer and DHCP gave it a different address), which is now solved.
The printer works, is printing, BUT.. still shows "printer not connected" and the ink bars are all blank...
Re: printer not connected
So, the printer address is set as bjnp://192.168.1.xxx:8611, however, in TurboPrint Control Center I see, Connection Type set to "standard printer" (shows an USB cable), instead of Other Printer (Network).
If I choose Other, I have the following options:
- LPD
- JetDirect
- IPP
- CUPS
None of these options works..
If I choose Other, I have the following options:
- LPD
- JetDirect
- IPP
- CUPS
None of these options works..
Re: printer not connected
hello?!
is there anybody out there?
is there anybody out there?
Re: printer not connected
Hello gian,
for the Canon Pixma Pro 10s the BJNP protocol should be used for data transfer via network. BJNP printer connections are detected automatically by TurboPrint when connected printers are searched (e.g. when editing a printer or adding a new one). Thus the appropriate connecton URI should be listed as available connection in "standard printers" - just select the correct entry there.
I have no idea why the printer status is not available on your computer - are using the latest TurboPrint release?
for the Canon Pixma Pro 10s the BJNP protocol should be used for data transfer via network. BJNP printer connections are detected automatically by TurboPrint when connected printers are searched (e.g. when editing a printer or adding a new one). Thus the appropriate connecton URI should be listed as available connection in "standard printers" - just select the correct entry there.
I have no idea why the printer status is not available on your computer - are using the latest TurboPrint release?