Nozzle check not working

Post Reply
Starfungi
Posts: 9
Joined: Tue Oct 23, 2018 12:04 am

Nozzle check not working

Post by Starfungi »

My 100s has been fine but today tried to print a nozzle check and there is no response. The test print works OK. Any ideas. I am connected by USB. Printing all works OK.

Tried via the canon driver and worked fine.

Just tried my Epson 720 on Printfab and doesn't work but on Epson driver works fine.

I recently updated too latest PrintFab version 1.13 6th May and this is the first time I have tried the nozzle test so I think there's a problem with the latest release on window 10 version.
zedonet
Site Admin
Posts: 2156
Joined: Fri Oct 06, 2006 8:02 am

Re: Nozzle check not working

Post by zedonet »

Hello,

this sounds like a known problem in PrintFab 1.13. A new version that fixes the problem will be released soon, I will post when the new version is available.

There is a workaround: Edit the printer in the PrintFab application and change the "Connection Type" from "Already set up" to "USB printer" or "Network" (depending on the printer connection).
zedonet
Site Admin
Posts: 2156
Joined: Fri Oct 06, 2006 8:02 am

Re: Nozzle check not working

Post by zedonet »

The new PrintFab version that fixes the problem is now available:

https://zedonet.com/download/printfabwi ... n_1.14.zip
Post Reply