Problems Printing Print Color Chart
Posted: Thu Jul 09, 2020 12:46 pm
I’m trying my best to get a print profile printed to send in, but I’m having great difficulty.
My printer is an Epson WF-7720. I sent an email in last week questioning why there is not a updated HQ printer driver for the WF-7720. I was told that I could use the Epson_WorkForceWF7710_HQ driver. So, in setting up my WF-7720, I used the 7710_HQ driver. Also, before I began trying to print the printer profile, I ran the last software update to Version 1.4. Finally, I proceeded to print the Ink Limit Test Row which resulted in printing only a semi-circle of the squares and not all were printed, only 125 - 200 printed. Next, tried printing the Printer Profiles and again only half of a circle of colored squares printed. Then, I exited out, and went to Printer Setting to verify that “letter size/A4” was selected thinking this might be causing an error. I did this hoping that some custom paper setting might have been still loaded, but it correctly read “Letter”. Now, I’ve wasted several pieces of sublimation paper and finally have given up.
Just to be clear, it is only printing a semi-circle of colored squares right against the margin of the paper (open side of the circle to the margin). It appears as if it is completely cutting off half of the circle of color swatches. I was selecting the Universal Profile, hoping that is adequate for sublimation? I purchased the PrintFab Pro XL Windows version.
Also, I need to verify if I am to select a Color Space before printing this Print Color Chart or is it defaulted to a particular setting?
Thanks in advance for your speedy reply.
UPDATE: Using the specified driver for the WF-7720, seems to have corrected the prints that were cut in half. I didn't try to print the Print Color Chart again, because the driver is lacking so much that the new HQ 7710 includes. Any chance of getting the correct driver for the WF-7720 soon since it is basically the same printer?
Linda
My printer is an Epson WF-7720. I sent an email in last week questioning why there is not a updated HQ printer driver for the WF-7720. I was told that I could use the Epson_WorkForceWF7710_HQ driver. So, in setting up my WF-7720, I used the 7710_HQ driver. Also, before I began trying to print the printer profile, I ran the last software update to Version 1.4. Finally, I proceeded to print the Ink Limit Test Row which resulted in printing only a semi-circle of the squares and not all were printed, only 125 - 200 printed. Next, tried printing the Printer Profiles and again only half of a circle of colored squares printed. Then, I exited out, and went to Printer Setting to verify that “letter size/A4” was selected thinking this might be causing an error. I did this hoping that some custom paper setting might have been still loaded, but it correctly read “Letter”. Now, I’ve wasted several pieces of sublimation paper and finally have given up.
Just to be clear, it is only printing a semi-circle of colored squares right against the margin of the paper (open side of the circle to the margin). It appears as if it is completely cutting off half of the circle of color swatches. I was selecting the Universal Profile, hoping that is adequate for sublimation? I purchased the PrintFab Pro XL Windows version.
Also, I need to verify if I am to select a Color Space before printing this Print Color Chart or is it defaulted to a particular setting?
Thanks in advance for your speedy reply.
UPDATE: Using the specified driver for the WF-7720, seems to have corrected the prints that were cut in half. I didn't try to print the Print Color Chart again, because the driver is lacking so much that the new HQ 7710 includes. Any chance of getting the correct driver for the WF-7720 soon since it is basically the same printer?
Linda