Label Print Problems
Posted: Wed Jul 29, 2020 9:13 pm
Two problems I have encountered:
First, I have an issue with the print output, it is approximately 3 - 4 cm to the right and high by the same distance.
I am printing a letter size PDF document from Linux MX (kernel 4.19.0) to a HP M452 via an IP network. The resolution is medium 300 dpi.
Printing with the native HPLIP works as expected.
Second, if I print a PDF at a resolution higher than 300, the printer restarts and no output is produced.
First, I have an issue with the print output, it is approximately 3 - 4 cm to the right and high by the same distance.
I am printing a letter size PDF document from Linux MX (kernel 4.19.0) to a HP M452 via an IP network. The resolution is medium 300 dpi.
Printing with the native HPLIP works as expected.
Second, if I print a PDF at a resolution higher than 300, the printer restarts and no output is produced.